Journal of Netshape Forming Engineering

Bimonthly
started in 1983
SUPERINTENDENT: China South Industries Group Co.,Ltd.
SPONSOR: Southwest Institute of Technology and Engineering
PUBLISHER: Editorial Office of Journal of Netshape Forming Engineering
POSTAL DISTRIBUTION CODE: 78-235
PRICING: RMB 35.00
ISSN 1674-6457
CN 50-1199/TB

10 July 2025, Volume 17 Issue 7

Download cover Download table of contents

Composite Material Rolling Technology and Equipment

Short-time Heat Bearing Capacity of Thick Gauge Steel/Aluminum/Aluminum Composite Plate Rolled at Different Temperature

LI Junquan, LIU Wenwen, CHEN Ke, SHI Yujie, ZHANG Peng

2025, 17(7): 1-8.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.001

Abstract ( ) Download PDF ( )

Microstructure of Ti-42Al-9V Alloy Sheets and Impact of Single Pass and Multiple Pass Rolling

TANG Peng, LIANG Guozheng, XU Xiaokun, ZHANG Shuzhi, ZHANG Xinyu, LIU Riping

2025, 17(7): 9-20.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.002

Abstract ( ) Download PDF ( )

Numerical Simulation on Flat-corrugated Cross Wedge Rolling of 42CrMo4/45 Steel Hollow Laminated Shaft

LEI Haitao, LI Zixuan, SHU Xuedao, PATER Zbigniew

2025, 17(7): 21-30.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.003

Abstract ( ) Download PDF ( )

Hot Roll Bonding Fabrication and Interfacial Microstructure and Properties of Titanium/Steel Clad Plates with Corrugated Interface

LIU Jinhua, LIU Peng, LUAN Qianqian, CHEN Zejun, XIA Xiangsheng, CHEN Qiang

2025, 17(7): 31-40.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.004

Abstract ( ) Download PDF ( )

Influence of Surface Treatment Methods on Bonding Strength of Hot-rolled Steel-aluminum Composite Plates

GUO Yunchang, LU Minghao, QI Zichen, REN Zhongkai, YU Chao, XIAO Hong

2025, 17(7): 41-51.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.005

Abstract ( ) Download PDF ( )

Effect of Rolling and Heat Treatment Process on Mechanical Properties of Extra-thick 3Cr2NiMo Steel Plate

KONG Lingyi, LUO Zongan, FENG Yingying, WU Zaoqin

2025, 17(7): 52-61.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.006

Abstract ( ) Download PDF ( )

Synergistic Mechanisms of Electropulsing-induced Dynamic Recrystallization and Low-temperature Dissolution of β-Mg₁₇Al₁₂ Phase in AZ31 Magnesium Alloy

GAO Xiangyu, YAN Renjie, ZHANG Tao, WANG Yanyan, GUO Yinglong, ZOU Jinchao

2025, 17(7): 62-68.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.007

Abstract ( ) Download PDF ( )

Iron and Steel Forming

Microstructure and Properties of Laser Tailor Welded Joints of QP1180/DP1180 Steel Plates with Different Thicknesses

LI Wenjuan, WANG Jinfeng, SU Wenchao, CHE Yajun, WANG Jing, GUO Yi, WANG Hailin, ZHANG Yuanhao

2025, 17(7): 69-78.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.008

Abstract ( ) Download PDF ( )

Forming of Double Spot Laser Welded Joints of Heterogeneous DP780/DP590 Dual Phase Steel with Different Thicknesses

WANG Jiahao, LIU Yan, LIU Xiaoang, ZHANG Wenguang

2025, 17(7): 79-88.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.009

Abstract ( ) Download PDF ( )

Temperature and Deformation Distribution during Hot Continuous Rolling Process of WP720 Super Weathering Resistant Steel

SU Zexing, LI Menglin, LI Liren, LIU Chengzhi, CHENG Shengwei, LIU Xifeng, KANG Jianguang, LI Taotao

2025, 17(7): 89-95.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.010

Abstract ( ) Download PDF ( )

Resistance Spot Welding and Laser Spiral Spot Welding Processes for Q235 Steel with Phosphide Coating

XU Ping, CHEN Ming, WANG Chongrui, ZHOU Aobo, GUO Tao, XIE Dianbao, FAN Donghui

2025, 17(7): 96-101.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.011

Abstract ( ) Download PDF ( )

Microstructure Evolution of Fe-3.5%Si Non-oriented Silicon Steel Prepared by Double Cold Rolling

WANG Yi'nan, LU Huihu, LIN Yuan, GU Xiangyu, QIAO Weidong, YANG Shengchao, QI Chengzhe, LI Zeyang

2025, 17(7): 102-109.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.012

Abstract ( ) Download PDF ( )

Creep-fatigue Fracture Mechanism and Microscopic Damage Behavior of New Martensitic Heat-resistant Steel

ZHOU Chao, HUANG Jun, MA Dongliang, SU Kailong, DU Jinfeng, ZHAO Lei

2025, 17(7): 110-118.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.013

Abstract ( ) Download PDF ( )

Light Alloy Forming

Preparation Technology, Application Status, and Development Trends of Copper-clad Aluminum Laminated Materials

LIU Yujiang, DU Wenyu, WANG Yan, ZHOU Yisong, HU Hongjun, YI Zhihao, WANG Xingdong, ZHONG Tao

2025, 17(7): 119-137.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.014

Abstract ( ) Download PDF ( )

Thermal Deformation Behavior and Microstructure Properties Evolution of LAZ931 MG-Li Alloy

LYU Yunxiang, LU Zhen, WU Lianmei, LI Fei, YI Manman, GAO Shiqing, XIA Xiangsheng

2025, 17(7): 138-144.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.015

Abstract ( ) Download PDF ( )

Effect of Different Heat Input on Microstructure and Properties of 7A52 Aluminum Alloy Oscillating MIG Welding Joints

JIANG Chengyun, ZHU Jialei, WANG Chengyuan, QI Shikong, ZHANG Ziyue, LIU Ting, LI Zhehui

2025, 17(7): 145-152.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.016

Abstract ( ) Download PDF ( )

Additive Manufacturing

Selective Laser Melting Additive Manufacturing, Heat Treatment and Property Study of Fe-20Cr-5Al Alloy

NI Xiaonan, MING Liang, HU Zijian, YANG Wenxin, WANG Ansen, DENG Xin

2025, 17(7): 153-163.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.017

Abstract ( ) Download PDF ( )

Structure of Hydrogel Support for Graphene/SiC Composite Prepared by Dual Extruder 3D Printer

WU Xuexue, LIU Hongjun, LI Yajun, TANG Run, YATSKOVSKYI Dmytro, LI Yamin

2025, 17(7): 164-174.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.018

Abstract ( ) Download PDF ( )

Composites Forming

Effects of Solid Solution and Cryogenic Deformation on AlCoCrFeNi-HEAp/2219Al Composites

YANG Yilong, ZHANG Yun

2025, 17(7): 175-182.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.019

Abstract ( ) Download PDF ( )

Research Status of Cold Pressing Sintering Technique in Dielectric Composites

WANG Xu, WU Yong, LI Jiang, CHENG Zaiqi, LI Chongxiu, LIU Ben, QIAO Zhengyang

2025, 17(7): 183-192.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.020

Abstract ( ) Download PDF ( )

Superalloy Forming

Hot Deformation Behavior and Dynamic Recrystallization Modeling and Simulation of GH6159 Superalloy

ZENG Xiang, LIAO Runze, XU Xuefeng, TU Qiqi, CHEN Xiaoxiao, LUO Jie, FAN Xu, HUANG Leheng, LIU Jie

2025, 17(7): 193-205.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.021

Abstract ( ) Download PDF ( )

Research Progress on Precision Rolling Technology of Nickel Based High-temperature Alloy Ultra-thin Strip

XU Chao, WU Wei, WU Yong, MENG Gang, WANG Fangjun, LIU Haiding, WANG Dongzhe, XIAO Jun

2025, 17(7): 206-218.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.022

Abstract ( ) Download PDF ( )

Advanced Manufacturing Technology and Equipment

Design and Process Parameter Optimization of Double Helix Flow Channel for Polar Hot Rollers

YAN Huajun, ZHOU Xuhang, YANG Guang, DAI Xuerui, YUAN Zhen'ge, WANG Baoyu, LIU Jinping, ZHOU Xingbang

2025, 17(7): 219-227.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.023

Abstract ( ) Download PDF ( )

Study on the Compound Extrusion Process of Automobile Steering Knuckle Shaft Sleeve

ZHANG Liangying, ZHAN Yanran, LU Jintao

2025, 17(7): 228-235.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.024

Abstract ( ) Download PDF ( )

Influence of Decorative Film Thickness on Molding Quality of MIM-IMD Products

JIN Xin, LIANG Xiangjing, HUANG Changyi, HUANG Zhenmin, YAN Kui, GUO Wei

2025, 17(7): 236-245.
https://doi.org/10.3969/j.issn.1674-6457.2025.07.025

Abstract ( ) Download PDF ( )

Please choose a citation manager

Content to export

Year Search

Quick Search

模态框（Modal）标题

Please choose a citation manager

Content to export

Year Search

Quick Search