低成本铸造镁合金研究现状及展望

华溪如; 董喜旺; 吴海; 陈林枫; 黄鑫垚; 刘波; 杨力祥; 杨唯一; 肖旅

doi:10.3969/j.issn.1674-6457.2025.12.008

PDF(2584 KB)

精密成形工程 ›› 2025, Vol. 17 ›› Issue (12) : 73-84. DOI: 10.3969/j.issn.1674-6457.2025.12.008

航天先进制造技术

低成本铸造镁合金研究现状及展望

华溪如¹, 董喜旺^1,2, 吴海¹, 陈林枫¹, 黄鑫垚¹, 刘波¹, 杨力祥¹, 杨唯一¹, 肖旅^1,*

作者信息 +

Research Status and Prospects of Low-cost Cast Magnesium Alloys

HUA Xiru¹, DONG Xiwang^1,2, WU Hai¹, CHEN Linfeng¹, HUANG Xinyao¹, LIU Bo¹, YANG Lixiang¹, YANG Weiyi¹, XIAO Lv^1,*

Author information +

文章历史 +

摘要

镁合金具备轻质、强阻尼性能、高比强度等特点,在航天领域拥有广阔的应用前景。高强韧铸造镁合金的力学性能提升主要依靠稀土元素高合金化,铸件制备所需的原材料成本高,且大量稀土元素会导致熔体制备流程复杂、铸造成形工艺性不佳,开裂和收缩类缺陷形成倾向强。材料配方、制备和铸造成形性方面的问题造成镁合金铸件强韧性、成形质量与低成本之间仍存在显著矛盾。随着我国对轻量化、低成本高端装备的需求日益迫切,开发出具备从原材料到铸件制备全流程低成本化的铸造镁合金材料具有重要意义。本文基于合金化、熔配工艺以及成形性3个方面,综述了当前低成本铸造镁合金的研究现状。展望了未来铸造镁合金低成本化的研究方向,旨在为新型低成本铸造镁合金的材料配方及配套工艺研发提供参考。

Abstract

Magnesium alloys possess characteristics such as lightweight, superior damping performance, and high specific strength, offering a bright application prospect in the field of aerospace. The improvement of mechanical properties in high-strength and high-toughness cast magnesium alloys primarily relies on alloying of rare earth elements. The raw material costs for casting production are high, and the extensive use of rare earth elements leads to complex molten material preparation processes, poor formability, and a strong tendency for defects such as cracking and shrinkage. Issues related to material formulation, preparation, and casting formability also result in significant trade-offs between the strength, toughness, forming quality, and low cost of magnesium alloy castings. With China's growing demands for lightweight, low-cost high-end equipment, developing cast magnesium alloys with a full-process cost-effective approach holds important significance. This paper reviews the current research status on low-cost cast magnesium alloys based on three aspects: alloying, melting preparation process, and formability. It also envisions future directions for achieving low-cost characteristics in cast magnesium alloys, aiming to provide references for the development of new low-cost cast magnesium alloy material compositions and supporting process technologies.

导出引用

华溪如, 董喜旺, 吴海, 陈林枫, 黄鑫垚, 刘波, 杨力祥, 杨唯一, 肖旅. 低成本铸造镁合金研究现状及展望[J]. 精密成形工程. 2025, 17(12): 73-84 https://doi.org/10.3969/j.issn.1674-6457.2025.12.008

HUA Xiru, DONG Xiwang, WU Hai, CHEN Linfeng, HUANG Xinyao, LIU Bo, YANG Lixiang, YANG Weiyi, XIAO Lv. Research Status and Prospects of Low-cost Cast Magnesium Alloys[J]. Journal of Netshape Forming Engineering. 2025, 17(12): 73-84 https://doi.org/10.3969/j.issn.1674-6457.2025.12.008

中图分类号： TG146.2

参考文献

[1] ZHANG J H, LIU S J, WU R Z, et al.Recent Developments in High-Strength Mg-RE-Based Alloys: Focusing on Mg-Gd and Mg-Y Systems[J]. Journal of Magnesium and Alloys, 2018, 6(3): 277-291.
[2] 吴海, 李蒙, 孙明珠, 等. Sm对Mg-6Gd-3Y-0.4Zr合金组织与力学性能的影响[J]. 特种铸造及有色合金, 2025, 45(6): 827-832.
WU H, LI M, SUN M Z, et al.Effects of Sm on Microstructure and Mechanical Properties of Mg-6Gd-3Y-0.4Zr Alloy[J]. Special Casting & Nonferrous Alloys, 2025, 45(6): 827-832.
[3] 陈舸, 肖旅, 董喜旺. 低溶质总量高强镁合金复杂铸件本体性能优化[J]. 特种铸造及有色合金, 2020, 40(8): 813-819.
CHEN G, XIAO L, DONG X W.Performance Optimization of Magnesium Alloy Complex Castings with Low Solute Content and High Strength[J]. Special Casting & Nonferrous Alloys, 2020, 40(8): 813-819.
[4] 樊晓泽, 王瑞, 马骏, 等. 混合稀土对AZ91D压铸镁合金流动性及力学性能的影响[J]. 铸造技术, 2022, 43(4): 285-289.
FAN X Z, WANG R, MA J, et al.Effect of Mixed-RE on Fluidity and Mechanical Properties of Die Casting AZ91D Magnesium Alloy[J]. Foundry Technology, 2022, 43(4): 285-289.
[5] LI J H, DU W B, LI S B, et al.Tensile and Creep Behaviors of Mg-5Zn-2.5Er Alloy Improved by Icosahedral Quasicrystal[J]. Materials Science and Engineering: A, 2010, 527(4/5): 1255-1259.
[6] 李杰华, 介万奇, 杨光昱. 稀土元素Gd对Mg-Zn-Zr镁合金组织和性能的影响[J]. 稀有金属材料与工程, 2008, 37(9): 1587-1591.
LI J H, JIE W Q, YANG G Y.Effect of Gadolinium on Microstructure and the Mechanical Properties of Mg-Zn-Zr Cast Magnesium Alloys[J]. Rare Metal Materials and Engineering, 2008, 37(9): 1587-1591.
[7] 王静. Mg-Zn-RE合金高压挤压铸造及热处理研究[D]. 武汉: 华中科技大学, 2018.
WANG J.Study on Mg-Zn-RE Magnesium Alloys via High Pressure Squeeze Casting and Heat Treatment[D]. Wuhan: Huazhong University of Science and Technology, 2018.
[8] ZHANG Y, HUANG X F, MA Z D, et al.The Influences of Al Content on the Microstructure and Mechanical Properties of As-Cast Mg-6Zn Magnesium Alloys[J]. Materials Science and Engineering: A, 2017, 686: 93-101.
[9] 李培亮. 高锌含量Mg-Zn-Al-Cu-Mn系列合金组织与力学性能研究[D]. 济南: 齐鲁工业大学, 2021.
LI P L.Study on Microstructure and Mechanical Properties of Mg-Zn-Al-Cu-Mn Series Alloys with High Zn Content[D]. Jinan: Qilu University of Technology, 2021.
[10] VINODH G, JAFARI N H R, LI D J, et al. Effect of Al Content on Hot-Tearing Susceptibility of Mg-10Zn-xAl Alloys[J]. Metallurgical and Materials Transactions A, 2020, 51(4): 1897-1910.
[11] WANG J, LIU R D, LUO T J, et al.A High Strength and Ductility Mg-Zn-Al-Cu-Mn Magnesium Alloy[J]. Materials & Design, 2013, 47: 746-749.
[12] CHEN Y M, LYU H, ZHOU Y X, et al.Enhancing the Mechanical Properties of Mg-Zn-Al-Cu-Mn Alloy via MgCO₃ Inoculation Treatment: Experimental Studies and First-Principles Calculations[J]. Materials & Design, 2023, 235: 112385.
[13] WANG C, CUI J, LUO T J, et al.Effect of Al on the Microstructure and Mechanical Properties of Mg-6Zn-2Sn-0.5Mn Alloy[J]. Materials Science and Technology, 2019, 35(12): 1464-1470.
[14] FU P H, PENG L M, JIANG H Y, et al.Tensile Properties of High Strength Cast Mg Alloys at Room Temperature: A Review[J]. China Foundry, 2014, 11(4): 277-286.
[15] ZHOU J, JAFARI N H R, LI D J, et al. Microstructure and Tensile Properties of the Mg-6Zn-4Al-xSn Die Cast Magnesium Alloy[J]. Metals, 2019, 9(2): 113.
[16] ZHU S Z, LUO T J, ZHANG T A, et al.Effects of Cu Addition on the Microstructure and Mechanical Properties of As-Cast and Heat Treated Mg-6Zn-4Al Magnesium Alloy[J]. Materials Science and Engineering: A, 2017, 689: 203-211.
[17] ZHU S Z, LUO T J, YANG Y S.Improving Mechanical Properties of Age-Hardenable Mg-6Zn-4Al-1Sn Alloy Processed by Double-Aging Treatment[J]. Journal of Materials Science & Technology, 2017, 33(11): 1249-1254.
[18] 林翰. Mg-Al基低成本铸造镁合金的研究与开发[D]. 重庆: 重庆大学, 2018.
LIN H.Research and Development of Mg-Al Based Casting Magnesium Alloys with Low Cost[D]. Chongqing: Chongqing University, 2018.
[19] HAN L, YANG M G, TANG H, et al.Microstructure and Mechanical Properties of AE81 Magnesium Alloy Fabricated by Low-pressure Sand Casting, Gravity Sand Casting and Gravity Die Casting Processes[C]//Proceedings of the 6th International Conference on Magnesium, Shenyang, Sept. 2017.
[20] 陈俊辰. 基于Sm合金化的Mg-Al-Zn-(Mn)铸造镁合金初生相和共晶相同步细化机制研究[D]. 长春: 吉林大学, 2024.
CHEN J C.Study on the Simultaneous Refinement Mechanism of Primary and Eutectic Phases in Cast Mg-Al-Zn-(Mn) Alloys Based on Sm Alloying[D]. Changchun: Jilin University, 2024.
[21] 赫国强, 董晟全, 梁艳峰, 等. 稀土Y和Ce元素对铸造Mg-Al-Zn合金组织和性能的影响[J]. 材料热处理学报, 2019, 40(3): 42-48.
HE G Q, DONG S Q, LIANG Y F, et al.Effect of Rare Earth Y and Ce Elements on Microstructure and Mechanical Properties of Cast Mg-Al-Zn Alloy[J]. Transactions of Materials and Heat Treatment, 2019, 40(3): 42-48.
[22] 赵天豪, 康晶杰, 王若兰, 等. 铸造高强Mg-Gd系合金研究进展[J]. 铸造设备与工艺, 2023(5): 66-72.
ZHAO T H, KANG J J, WANG R L, et al.Research Progress in Casting High Strength Mg-Gd Alloys[J]. Foundry Equipment & Technology, 2023(5): 66-72.
[23] ROKHLIN L L, DOBATKINA T V, NIKITINA N I, et al. Constitution and Properties of the Ternary Magnesium Alloys Containing Two Rare-Earth Metals of Different Subgroups[J]. Material Science Forum, 2003, 419/420/421/422: 291-296.
[24] 蒋海燕, 付彭怀, 彭立明, 等. Mg-3Nd-0.2Zn-0.4Zr合金的显微组织与力学性能[J]. 特种铸造及有色合金, 2008, 28(S1): 254-258.
JIANG H Y, FU P H, PENG L M, et al.The Microstructure and Mechanical Properties of Mg-3Nd-0.2Zn-0.4Zr Alloy[J]. Special Casting & Nonferrous Alloys, 2008, 28(S1): 254-258.
[25] YANG L X, HUANG Y D, HOU Z Q, et al.Microstructure, Mechanical Properties and Fracture Behaviors of Large-Scale Sand-Cast Mg-3Y-2Gd-1Nd-0.4Zr Alloy[J]. Journal of Magnesium and Alloys, 2023, 11(8): 2763-2775.
[26] 曾德珍, 李慧中, 粱霄鹏, 等. Mg-Y-Nd-Zr合金的微观组织和力学性能研究[J]. 湖南有色金属, 2019, 35(3): 50-55.
ZENG D Z, LI H Z, LIANG X P, et al.The Study on the Microstructure and Mechanical Properties of a Mg-Y-Nd-Zr Alloy[J]. Hunan Nonferrous Metals, 2019, 35(3): 50-55.
[27] 杨来东, 李全安, 陈晓亚, 等. Mg-Sm系镁合金的研究进展[J]. 材料导报, 2022, 36(7): 192-200.
YANG L D, LI Q A, CHEN X Y, et al.Recent Advance of Mg-Sm System Alloys[J]. Materials Reports, 2022, 36(7): 192-200.
[28] 吴德勇. Mg-3Y-2Zn-0.6Zr-Gd/Sm镁合金显微组织和力学性能控制的基础研究[D]. 重庆: 重庆理工大学, 2016.
WU D Y.Basic Research about Controlling of Microstructure and Mechanical Properties for Mg-3Y-2Zn-0.6Zr-Gd/Sm Magnesium Alloys[D]. Chongqing: Chongqing University of Technology, 2016.
[29] 苏昕, 李德江, 谢艳才, 等. 重力铸造Mg-5.8Sm-0.4Zn-0.3Zr合金的热处理研究[J]. 特种铸造及有色合金, 2012, 32(7): 668-670.
SU X, LI D J, XIE Y C, et al.Effect of Heat Treatment on Microstructure and Mechanic Properties of Gravity Casting Mg-5.8Sm-0.4Zn-0.3Zr Magnesium Alloy[J]. Special Casting & Nonferrous Alloys, 2012, 32(7): 668-670.
[30] 张浩. Mg-Sm(-Mn)合金微观结构、力学和导热性能研究[D]. 哈尔滨: 哈尔滨工程大学, 2023.
ZHANG H.Microstructure, Mechanical Properties and Thermal Conductivity of Mg-Sm(-Mn) Alloy[D]. Harbin: Harbin Engineering University, 2023.
[31] 田政. 组分优化对WE43镁合金显微组织与力学性能的影响[D]. 长春: 吉林大学, 2020.
TIAN Z.Effect of Composition Optimization on Microstructure and Mechanical Properties of WE43 Magnesium Alloy[D]. Changchun: Jilin University, 2020.
[32] 秦成, 车朝杰, 程丽任, 等. 铸态Mg-Sm-Gd-Zn-Zr合金微观组织与力学性能研究[J]. 中国稀土学报, 2021, 39(3): 523-530.
QIN C, CHE C J, CHENG L R, et al.Microstructure and Mechanical Properties of As-Cast Mg-Sm-Gd-Zn-Zr Alloy[J]. Journal of the Chinese Society of Rare Earths, 2021, 39(3): 523-530.
[33] PENG Q M, WANG J L, WU Y M, et al.Microstructures and Tensile Properties of Mg-8Gd-0.6Zr-XNd-YY (x+y=3, Mass%) Alloys[J]. Materials Science and Engineering: A, 2006, 433(1/2): 133-138.
[34] 王迎新, 付彭怀, 彭立明. VW103Z镁合金舱体铸件铸造工艺研究[J]. 铸造, 2023, 72(8): 969-979.
WANG Y X, FU P H, PENG L M.Study on Casting Process for VW103Z Magnesium Alloy Cabin Casting[J]. Foundry, 2023, 72(8): 969-979.
[35] 章桢彦. Mg(-Gd)-Sm-Zr合金的微观组织、力学性能和析出相变研究[D]. 上海: 上海交通大学, 2009.
ZHANG Z Y.Study on the Microstructure, Mechanical Properties and Precipitated Phase Transformations of Mg(-Gd)-Sm-Zr Alloys[D]. Shanghai: Shanghai Jiao Tong University, 2009.
[36] 渡边哲, 黄燕, 小松龙, 等. 镁熔液的脱气处理相关研究[J]. 铁与钢, 1976, 26(6): 266-272.
WATANABE T, HUANG Y, XIAO S L, et al.Research on Degassing Treatment of Magnesium Melt[J]. Iron and Steel, 1976, 26(6): 266-272.
[37] 吴国华, 童鑫, 眭怀明, 等. 镁稀土合金熔体处理研究现状与展望[J]. 铸造, 2021, 70(1): 2-14.
WU G H, TONG X, SUI H M, et al.Research Status and Prospect of Melt Treatment of Magnesium-Rare Earth Alloy[J]. Foundry, 2021, 70(1): 2-14.
[38] WU G H, KANG S H, YOU B S, et al. Effects of Non-Flux Purification on the Microstructure and Mechanical Properties of AZ31+xCa Mg Alloy[J]. Materials Science Forum, 2007, 546/547/548/549: 217-220.
[39] 李英虹, 许光明, 崔建忠. 电磁场对镁合金熔体的净化作用[J]. 轻合金加工技术, 2008, 36(7): 19-22.
LI Y H, XU G M, CUI J Z.Purification of Magnesium Alloy Melt under Electromagnetic Field[J]. Light Alloy Fabrication Technology, 2008, 36(7): 19-22.
[40] 查吉利. 镁熔体无熔剂连续精炼理论及关键技术研究[D]. 重庆: 重庆大学, 2018.
ZHA J L.A Study on Mg Melt Continuous Non-flux Purification Theory and Key Techniques[D]. Chongqing: Chongqing University, 2018.
[41] 赵校军. 一种金属镁及镁合金精炼方法: 中国, 201711337654.3[P].2018-05-22.
ZHAO X J. A Refining Method for Metallic Magnesium and Magnesium Alloys: China, 201711337654.3[P].2018-05-22.
[42] 赵宇, 陈莉, 周宏. AZ91D镁合金遗传性研究[J]. 铸造技术, 2009, 30(12): 1551-1555.
ZHAO Y, CHEN L, ZHOU H.Hereditary Transmission of AZ91D Magnesium Alloy[J]. Foundry Technology, 2009, 30(12): 1551-1555.
[43] 李日娟. 再生镁合金铸锭质量控制及铸锭机设计[D]. 重庆: 重庆大学, 2007.
LI R J.Quality Control of Recycling Magnesium Alloy Ingot and the Casting Machine Design[D]. Chongqing: Chongqing University, 2007.
[44] 肖旅, 陈舸, 董喜旺, 等. VW63Z铸造镁稀土合金回炉料遗传性及晶粒细化特征研究[J]. 铸造, 2021, 70(1): 21-27.
XIAO L, CHEN G, DONG X W, et al.Heredity and Grain Refinement Characteristics of Mg-RE Cast Alloy Scrap Returns[J]. Foundry, 2021, 70(1): 21-27.
[45] 张德平, 唐定骧, 陈云贵, 等. 滞销镧铈/镧镨铈混合稀土金属在金属材料中的应用[J]. 稀土, 2009, 30(5): 70-77.
ZHANG D P, TANG D X, CHEN Y G, et al.Application of Unsalable LaCe/LaPrCe Mischmetal in Metallic Material Field[J]. Chinese Rare Earths, 2009, 30(5): 70-77.
[46] 张亚琴, 刘海平, 樊晓泽, 等. Sm部分替代Ce、La对A(Ce、La)44合金组织与性能的影响[J]. 特种铸造及有色合金, 2017, 37(5): 478-481.
ZHANG Y Q, LIU H P, FAN X Z, et al.Effect of Sm Partial Substituted Ce, La on Microstructure and Properties of a(Ce, La)₄₄ Alloy[J]. Special Casting & Nonferrous Alloys, 2017, 37(5): 478-481.
[47] 郑涛. 熔盐电解制备Mg-Li-RE(Pr,Ho,Er)合金机理研究[D]. 哈尔滨: 哈尔滨工程大学, 2011.
ZHENG T.Study on Mg-Li-RE (Pr, Ho, Er) Alloys Prepared by Molten Salt Electrolysis and Electrochemical Formation Mechanism[D]. Harbin: Harbin Engineering University, 2011.
[48] 赵世喆. 稀土氧化物直接还原制备含稀土AZ31镁合金组织及性能的研究[D]. 长春: 吉林大学, 2016.
ZHAO S Z.The Research of Microstructure and Properties of RE AZ31 Alloys Prepared by Deoxidized RE Oxides[D]. Changchun: Jilin University, 2016.
[49] 王峰, 白盛巍, 王志, 等. Mg-Zn系合金热裂行为的研究进展[J]. 金属学报, 2024, 60(6): 743-759.
WANG F, BAI S W, WANG Z, et al.Research Progress on Hot Tearing Behavior of Mg-Zn Series Alloys[J]. Acta Metallurgica Sinica, 2024, 60(6): 743-759.
[50] 潘复生, 吴国华. 新型合金材料——镁合金[M]. 北京: 中国铁道出版社, 2017: 65-102.
PAN F S, WU G H.A New Alloy Material-Magnesium Alloy[M]. Beijing: China Railway Publishing House, 2017: 65-102.
[51] 顾皞, 蒋清, 常志勇, 等. Mg-Gd-Y合金及其构件的组织与性能研究[J]. 精密成形工程, 2024, 16(2): 38-45.
GU H, JIANG Q, CHANG Z Y, et al.Structure and Properties of Mg-Gd-Y Alloy and Its Components[J]. Journal of Netshape Forming Engineering, 2024, 16(2): 38-45.
[52] ZHANG G J, WANG Y, LIU Z, et al.Influence of Al Addition on Solidification Path and Hot Tearing Susceptibility of Mg-2Zn-(3+0.5x)Y-XAl Alloys[J]. Journal of Magnesium and Alloys, 2019, 7(2): 272-282.
[53] FENG Y, MAO P L, LIU Z, et al.Hot Tearing Susceptibility of MgZn_4.5Y_xZr_0.5 Alloys and Mechanism[J]. China Foundry, 2016, 13(3): 159-165.
[54] 何庆彪, 杜庆安, 李浈. 航天器复杂薄壁镁合金铸件低压铸造工艺研究[J]. 特种铸造及有色合金, 2010, 30(11): 1033-1034.
HE Q B, DU Q A, LI Z.Production of Complex Thin-Walled Magnesium Alloy Components for Spacecraft by Low Pressure Casting[J]. Special Casting & Nonferrous Alloys, 2010, 30(11): 1033-1034.