胡招,章志兵,杜亭,等.基于 NX 平台的汽车覆盖件模具网络标准件库系统[J].精密成形工程,2014,6(1):63-68.
HU Zhao,ZHANG Zhi-bing,DU Ting,et al.Development of NX-based Online Standard Part Library System for Automobile Panel Die[J].Journal of Netshape Forming Engineering,2014,6(1):63-68. |
| 基于 NX 平台的汽车覆盖件模具网络标准件库系统 |
| Development of NX-based Online Standard Part Library System for Automobile Panel Die |
| 投稿时间：2013-10-10 修订日期：2013-10-10 |
| DOI：10.3969/j.issn.1674-6457.2014.01.012 |
| 中文关键词: 标准件库 模具设计 网络 BOM |
| 英文关键词: standard part library mold design online BOM |
| 基金项目:中央高校基本科研业务费资助(2012QN044) |
|
| 摘要点击次数: 8080 |
| 全文下载次数: 3772 |
| 中文摘要: |
| 目的 针对目前汽车覆盖件模具标准件库管理无序、属性信息不全面、操作重复等问题,在NX 平台上开发网络标准件库系统。 方法 系统采用 C / S 模式,对标准件库进行统一管理和维护,利用属性关联技术自动对标准件赋属性。 结果 简化了 BOM 的操作,实现了 BOM 表的自动化生成。 结论 利用该系统,减少了重复设计、提高了设计效率,最后通过某汽车覆盖件的模具设计实例说明了标准件系统的可行性和实用性。 |
| 英文摘要: |
| Objective At present, there are a number of problems for the standard part library system for automobile cover mold, including the disordered management, the incomplete attribute information, and the repeated operation. Methods To solve these problems, a online standard part library system was developed based on NX platform. The system, which adopted C / S mode, unified the management and maintenance of the standard part library. Results The attribute information was automatically assigned to the standard parts using the correlation technology, which simplified the BOM of the operation, and realized the automatic generation of BOM list. Conclusion Finally, a particular mould design example for automobile covering parts was given to illustrate the feasibility and practicability of this standard system. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号