文章摘要
吴健文,陈浩宇,高阳,等.锁孔TIG焊接技术的研究进展[J].精密成形工程,2020,12(4):1-9.
WU Jian-wen,CHEN Hao-yu,GAO Yang,et al.Research Progress of Keyhole TIG Welding Technology[J].Journal of Netshape Forming Engineering,2020,12(4):1-9.
锁孔TIG焊接技术的研究进展
Research Progress of Keyhole TIG Welding Technology
投稿时间:2020-05-12  修订日期:2020-07-10
DOI:10.3969/j.issn.1674-6457.2020.04.001
中文关键词: 锁孔TIG焊  焊接波形控制  快频脉冲焊接
英文关键词: keyhole TIG welding  welding waveform control  interpulse welding
基金项目:国家自然科学基金(51875212);广东省科技计划(2018A030313192,2019B090919002);广州市国际合作项目(201807010035,2019070110006);深圳市技术攻关重点项目(JSGG20191118102201716)
作者单位
吴健文 1. 华南理工大学 机械与汽车工程学院广州 510640 
陈浩宇 1. 华南理工大学 机械与汽车工程学院广州 510640 
高阳 2. 鞍山科德轧辊表面处理有限公司辽宁 鞍山 114021 
范文艳 1. 华南理工大学 机械与汽车工程学院广州 5106403. 广州海关技术中心广州 510623 
闫德俊 4. 中船黄埔文冲船舶有限公司广州 510715 
饶宇中 4. 中船黄埔文冲船舶有限公司广州 510715 
王振民 1. 华南理工大学 机械与汽车工程学院广州 510640 
摘要点击次数: 2965
全文下载次数: 2304
中文摘要:
      锁孔TIG焊接技术具有不开坡口、单面焊双面成形的特点,尤其适用于中厚板焊接。首先介绍了锁孔TIG焊的基本原理,然后分析了目前锁孔TIG焊接波形控制技术的研究现状,主要包括恒流锁孔TIG焊、单脉冲锁孔TIG焊和高低频双脉冲锁孔TIG焊。针对现有锁孔TIG焊接技术存在热输入量过大、接头组织晶粒粗大等缺点,重点介绍了一种新型的快频脉冲TIG焊接技术,它通过快频脉冲电流产生的电磁场对电弧进行压缩,控制焊接过程的热输入量,达到提高焊接质量的目的。与传统脉冲电弧相比,快频脉冲电弧的收缩效果更为明显,可细化焊接接头组织,将快频脉冲焊接技术应用于锁孔TIG焊是今后研究的热点和主要发展方向。
英文摘要:
      The keyhole TIG welding has the feature of one-side welding with back formation and without groove. It is especially suitable for welding plates of moderate thickness. This paper first introduced the basic principle of keyhole TIG welding, and then analyzed the research status of the current general keyhole TIG welding waveform control technologies, including constant current keyhole TIG welding, single pulse keyhole TIG welding and high and low frequency double pulse keyhole TIG welding. In view of the shortcomings of keyhole TIG welding technology, such as too much heat input and coarse grain of joint structure, a new type of interpulse TIG welding technology was mainly introduced. It controlled the heat input in the welding process by compressing the arc with the electromagnetic field generated by the interpulse current, so as to improve the welding quality. Compared with the traditional pulse, the interpulse arc has obvious shrinkage effect which can refine the structure of welded joint. The application of interpulse welding waveform to keyhole TIG welding is the hot spot and main development direction in the future.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12072339位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号