文章摘要
郑爱萍.基于 MasterCAM 的复杂四通管接头凹模的加工[J].精密成形工程,2016,8(4):92-95.
ZHENG Ai-ping.Machining of Complex Die for Four-way Pipe Joint Based on MasterCAM[J].Journal of Netshape Forming Engineering,2016,8(4):92-95.
基于 MasterCAM 的复杂四通管接头凹模的加工
Machining of Complex Die for Four-way Pipe Joint Based on MasterCAM
投稿时间:2016-06-04  修订日期:2016-07-10
DOI:10.3969/j.issn.1674-6457.2016.04.018
中文关键词: MasterCAM  四通管接头  数控编程  加工工艺
英文关键词: MasterCAM  four-way pipe joint  NC programming  machining techniques
基金项目:
作者单位
郑爱萍 云浮市高级技工学校广东 云浮 527343 
摘要点击次数: 3619
全文下载次数: 3488
中文摘要:
      在分析四通管接头凹模造型结构和加工技术要求的基础上,针对高要求的尺寸精度和表面光洁度的加工难点问题, 提出了不同的解决方案,最终经过对比分析验证, 提出了采用曲面投影融接加工的方案。实践证明,采用该方案取得了良好的经济效益,为其他同类零件的加工提供了参考。
英文摘要:
      By analyzing the structure of complex die for four-way pipe joint and machine technical requirements, different solutions were proposed according to the requirements of high precision and machining difficulties of the surface smoothness. Also, by final comparative analysis and verification, the proposal of adopting curved-surface projection for welding machining was put forward. It’s been proved that the measure has achieved excellent economic benefits, and has provided references for machining similar spare parts.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12080931位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号