|
| 拖钩辊锻制坯工艺模拟 |
| Roll Blanking Process Simulation of Towing Hook |
| Received:February 16, 2012 Revised:February 01, 2013 |
| DOI：10.3969/j.issn.1674-6457.2013.02.017 |
| 中文关键词: 拖钩 辊锻制坯 工艺设计 |
| 英文关键词: towing hook roll blanking process process design |
| 基金项目:教育部重点项目(311025) |
| Author Name | Affiliation | | YU Jian-jun | Hefei University of Technology, Hefei 230009, China | | CHEN Wen-lin | Hefei University of Technology, Hefei 230009, China | | SHA Ben | Hefei University of Technology, Hefei 230009, China | | ZHANG Yuan | Hefei University of Technology, Hefei 230009, China | | LI Zhi-wen | Hefei Automobile Forging Co. , Ltd. , Hefei 230031, China |
|
| Hits: 4850 |
| Download times: 3960 |
| 中文摘要: |
| 采取辊锻工艺对汽车拖钩锻件进行制坯,并利用有限元模拟软件对整个过程进行模拟,得到无飞边、无毛刺的坯料。 分析了坯料在型槽中的变形过程、应力分布及受力情况,为拖钩的工艺设计及参数选取提供依据。 |
| 英文摘要: |
| Using roll forging process,the towing hook blank was made,the entire process was simulated by finite element simulation software,and the no flash and burr blank was gotten. The deformation process,stress distribution and force conditions of blank in the die cavity were analysed,which provided the basis for the process design and parameter selection for towing hook. |
|
View Full Text
View/Add Comment Download reader |
| Close |
|
|
|
渝公网安备 50010702501719号