文章摘要
摆辗机摆头4种运动轨迹的模拟与分析
Simulation and Analysis of Four Trajectories of Orbital Forming Press Head
Received:December 20, 2010  Revised:March 10, 2011
DOI：
中文关键词: 摆辗  摆头  运动轨迹  仿真模拟
英文关键词: orbital forming  orbital head  trajectory  simulation
基金项目:
Author NameAffiliation
FENG Wen-cheng Beijing Research Institute of Mechanical & Electrical Technology， Beijing 100083， China 
YAO Wan-gui Beijing Research Institute of Mechanical & Electrical Technology， Beijing 100083， China 
SHAO Chang-bin Beijing Research Institute of Mechanical & Electrical Technology， Beijing 100083， China 
YUAN Hong-xia Beijing Research Institute of Mechanical & Electrical Technology， Beijing 100083， China 
HU Ya-min No.59 Institute of China Ordnance Industry， Chongqing 400039， China 
Hits: 4577
Download times: 3423
中文摘要:
      针对国外摆辗机摆头4种运动轨迹的运动原理，推导摆头运动方程，用UG NX三维〖JP3〗设计软件建立驱动摆头运动的内、外偏心套结构模型，对摆头运动仿真模拟，理论分析摆头4种运动曲线，验证仿真模拟结果。
英文摘要:
      According to movement principle of orbital head three-dimensional design software UG NX is used to build simplified models of the inner and outer eccentric sleeves which drive orbital head movement for four trajectories of foreign orbital forming press head. The orbital head movement is simulated, the equations of orbital head motion are derived, four trajectories from the theoretical aspects are analyzed, the simulation results are verified, the rules of motion are summarized.
View Full Text   View/Add Comment  Download reader
Close

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

You are the859645visitor    渝ICP备15012534号-4

>Copyright：Journal of Netshape Forming Engineering 2014 All Rights Reserved

>Postal Code： Phone：Fax： Email:

>    

渝公网安备 50010702501719号