周福伟,尹勇,刘长海,等.槽板弯曲工艺及模具设计[J].精密成形工程,2011,3(5):72-74.
ZHOU Fu-wei,YIN Yong,LIU Chang-hai,et al.Trough Plate Bending Process Research and Die Design[J].Journal of Netshape Forming Engineering,2011,3(5):72-74. |
| 槽板弯曲工艺及模具设计 |
| Trough Plate Bending Process Research and Die Design |
| 投稿时间：2011-05-02 修订日期：2011-09-10 |
| DOI： |
| 中文关键词: 槽板 弯曲工艺 模具设计 |
| 英文关键词: trough plate bending process die design |
| 基金项目: |
|
| 摘要点击次数: 4171 |
| 全文下载次数: 3218 |
| 中文摘要: |
| 对槽板零件及其工艺性进行了分析,详细计算了该零件的毛坯长度、弯曲回弹量、弯曲力等工艺参数,根据弯曲工艺的分析及其参数的计算结果，叙述了该零件弯曲模具的设计结构，说明了模具的工作过程,最后阐述了该弯曲模具的设计经过。 |
| 英文摘要: |
| The trough plate part and process were analyzed. A detailed calculation of its blank length, bending spring back quantity, bending process parameters was introduced. According to the bending technology analysis and parameters calculation, the design of bending die structure of the part was described, the working process of the die was explained. Finally, the design of punch and concave die was introduced. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号