韩帅帅,将定举,黄海波,等.电连接器外壳冷挤压工艺分析与数值模拟[J].精密成形工程,2011,3(5):43-46.
HAN Shuai-shuai,JIANG Ding-ju,HUANG Hai-bo,et al.Numerical Simulation Analysis and Research on the Cold Extrusion Technology of Electrical Connector Shell[J].Journal of Netshape Forming Engineering,2011,3(5):43-46. |
| 电连接器外壳冷挤压工艺分析与数值模拟 |
| Numerical Simulation Analysis and Research on the Cold Extrusion Technology of Electrical Connector Shell |
| 投稿时间：2011-06-18 修订日期：2011-09-10 |
| DOI： |
| 中文关键词: 电连接器 工艺方案 模拟分析 镦粗 |
| 英文关键词: electrical connector process scheme simulation and analysis upsetting |
| 基金项目:黔科合J字［2011］2217号 |
|
| 摘要点击次数: 4067 |
| 全文下载次数: 3182 |
| 中文摘要: |
| 针对电连接器外壳冷挤压成形工艺的特点，进行数值模拟分析，设计了合理的成形工艺。通过工艺实验论证，结果表明，设计的工艺能保证获得符合图纸要求的电连接器外壳尺寸。 |
| 英文摘要: |
| Aiming at the characteristics of cold extrusion forming technology for the electrical connector shell，the analysis of numerical simulation was made，the process parameters influencing extrusion forming were found out，and the rational forming technology was designed．The results of experiments indicates that the process design ensures the electrical connector shell size, and solves the problem of uneven flow of the metal in the extrusion process, reduces the process experiment cycle. It is of great significance to guide the electrical connector shell cold extrusion production and application of parts． |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号