王宾,秦建平,王福利,等.不锈钢管冷旋压热力耦合有限元模拟[J].精密成形工程,2011,3(5):31-34.
WANG Bin,QIN Jian-ping,WANG Fu-li,et al.FEM Coupled Thermal-mechanical Simulation of Cold Spinning of Stainless Steel Pipe[J].Journal of Netshape Forming Engineering,2011,3(5):31-34. |
| 不锈钢管冷旋压热力耦合有限元模拟 |
| FEM Coupled Thermal-mechanical Simulation of Cold Spinning of Stainless Steel Pipe |
| 投稿时间：2011-04-13 修订日期：2011-09-10 |
| DOI： |
| 中文关键词: 冷旋压 不锈钢管 热力耦合有限元 |
| 英文关键词: cold spinning stainless steel pipe coupled thermal-mechanical finite element |
| 基金项目:太原市大学生创新创业专项（100115156） |
|
| 摘要点击次数: 4201 |
| 全文下载次数: 3057 |
| 中文摘要: |
| 针对316不锈钢管建立了三维热力耦合有限元模型，对其冷旋压过程进行模拟。在模拟的过程中施加了对流和热传导边界条件，计算了成形过程中的受力特征、运动轨迹、接触特征以及温度场的情况。通过有限元模拟可以为分析不锈钢管冷旋压成形及组织状态提供有力依据，进而有效地指导生产实践。 |
| 英文摘要: |
| Focusing on a 316 stainless steel pipe，a 3D elastic plastic FEM coupled thermal-mechanical model on cold spinning is founded to simulate the process of the cold spinning. The temperature boundary conditions of heat transfer and heat forced convection are applied, the variation of spinning force，motion trail，contact states and the variation of temperature distribution on the workpiece are presented. The finite element simulation for stainless steel pipe provides effective basis for analysis of cold spinning of stainless steel pipe and its microstructure then effectively directs the production practice. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号