潘玲,姜春茂,吴忠江,等.钢管收口代替方钢热冲拔弹体毛坯加工工艺研究[J].精密成形工程,2011,3(5):14-16,58.
PAN Ling,JIANG Chun-mao,WU Zhong-jiang,et al.Shell Body Blank Processing Technology Research for Nosing of Steel Tube instead of Hot Punching and Drawing of Square Steel[J].Journal of Netshape Forming Engineering,2011,3(5):14-16,58. |
| 钢管收口代替方钢热冲拔弹体毛坯加工工艺研究 |
| Shell Body Blank Processing Technology Research for Nosing of Steel Tube instead of Hot Punching and Drawing of Square Steel |
| 投稿时间：2011-07-26 修订日期：2011-09-10 |
| DOI： |
| 中文关键词: 钢管收口 代替方钢热冲拔 工艺研究 |
| 英文关键词: nosing of steel tube hot punching and drawing of square steel technology research |
| 基金项目: |
|
| 摘要点击次数: 4163 |
| 全文下载次数: 3183 |
| 中文摘要: |
| 重点介绍了炮弹新产品弹体毛坯由钢管收口代替传统的方钢热冲拔加工工艺，弹体一次收口工艺研究过程。确定的弹体生产工艺，工艺过程简单，产品质量得到大幅度提高，改善了工作环境，降低了劳动强度，在同行业处于领先水平，并为新型薄壁弹种的研发奠定了工艺基础。 |
| 英文摘要: |
| It was introduced that hot punching and drawing of square steel were replaced by nosing of steel tube for the processing of the shell body blank of a new projectile. The process was simple, the product quality was improved greatly, the working environment was improved, the labor intensity was decreased. The research made foundations for the development of new type of thin-walled projectiles. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号