李六如,杜绍贵,付雪梅.RR装置上曲轴镦锻工艺优化研究[J].精密成形工程,2011,3(5):5-8.
LI Liu-ru,DU Shao-gui,FU Xue-mei.Forging Process Optimization Study of Crankshaft on RR Device[J].Journal of Netshape Forming Engineering,2011,3(5):5-8. |
| RR装置上曲轴镦锻工艺优化研究 |
| Forging Process Optimization Study of Crankshaft on RR Device |
| 投稿时间：2011-06-18 修订日期：2011-09-10 |
| DOI： |
| 中文关键词: 曲轴 RR装置 小直径坯料 |
| 英文关键词: crankshaft RR device blank in smaller diameter |
| 基金项目: |
|
| 摘要点击次数: 4149 |
| 全文下载次数: 3144 |
| 中文摘要: |
| 以16V280曲轴为试验对象，通过对RR装置的镦锻工艺、曲柄臂锻件形状和锻造模具结构优化，研究了采用小直径坯料的情况下16V280曲轴曲柄臂的成形情况。试验结果显示，优化后的预上弯镦锻工艺，能保证在RR装置上采用小直径坯料镦锻曲轴可行。 |
| 英文摘要: |
| The 16V280 crankshaft has been investigated as an object of study. Through the optimization of forging process on RR device, forging shape of crank web and structure design of forging die, deformation test has been done to study the forming status of crank web in the case of adopting blank in smaller diameter. Testing result shows that it's available that adopting blank of smaller diameter to forge crankshaft on RR device by the means of upward pre-forging. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号