胡传凯,陈强,舒大禹,等.镁合金典型构件等温成形数值模拟及优化[J].精密成形工程,2011,3(5):1-4.
HU Chuan-kai,CHEN Qiang,SHU Da-yu,et al.Numerical Simulation and Optimization of Isothermal Forming for Magnesium Alloy Part[J].Journal of Netshape Forming Engineering,2011,3(5):1-4. |
| 镁合金典型构件等温成形数值模拟及优化 |
| Numerical Simulation and Optimization of Isothermal Forming for Magnesium Alloy Part |
| 投稿时间：2011-07-13 修订日期：2011-09-10 |
| DOI： |
| 中文关键词: 等温成形 数值模拟 预制坯 |
| 英文关键词: isothermal forming numerical simulation preform |
| 基金项目: |
|
| 摘要点击次数: 4210 |
| 全文下载次数: 3053 |
| 中文摘要: |
| 运用DEFORM-3D软件对镁合金箱盖的等温成形过程进行了有限元数值模拟分析。根据箱盖结构特点，初步设计3种形状的预制坯，依据数值模拟结果，优化得到最终预制坯，并分析了等温成形过程中箱盖的等效应力、等效应变、速度、载荷-行程曲线等。研究结果，Ⅲ型预制坯金属在各个部位的流动相对较均匀，流动自然平滑，无拉伤、折叠等缺陷发生。综合分析，得出Ⅲ号预制坯的成形效果最好。 |
| 英文摘要: |
| This paper presents the numerical simulation results of isothermal forming of magnesium alloy part by the software DEFORM-3D. According to part structural characteristics, the three kinds of preform are designed, based on the numerical simulation results, optimum preformed shape is confirmed, as well as the equivalent stress, equivalent strain, speed rate, curve of load-distance. The results show that the third preformed shape is best for its uniform metal flow without folding and pulling. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号