李君,王岗超,石文超.圆柱直齿轮冷精锻模拟及试验研究[J].精密成形工程,2011,3(2):11-14.
LI Jun,WANG Gang-chao,SHI Wen-chao.Simulation and Experimental Study on Cold Precision Forging of Spur Gear with Big Modulus[J].Journal of Netshape Forming Engineering,2011,3(2):11-14. |
| 圆柱直齿轮冷精锻模拟及试验研究 |
| Simulation and Experimental Study on Cold Precision Forging of Spur Gear with Big Modulus |
| 投稿时间：2010-07-23 修订日期：2011-03-10 |
| DOI： |
| 中文关键词: 圆柱直齿轮 冷锻 分流法 试验研究 |
| 英文关键词: spur gear cold forging divided flow method experiment |
| 基金项目:合肥工业大学大学生创新性实验计划项目(2009CXSY092）；安徽省2008科技攻关计划面上项目(08010202132) |
|
| 摘要点击次数: 4145 |
| 全文下载次数: 3213 |
| 中文摘要: |
| 针对大模数圆柱直齿轮冷锻的困难性，提出了开放式分流和齿顶分流等2种分流工艺。结合浮动凹模技术，通过数值模拟与物理试验相结合，对2种工艺进行了分析研究，并与一般轴向分流工艺方案进行了对比。结果表明：这2种工艺方案能大大地降低载荷及单位压强，提高充填性能。锻件只需车削外圆或端面即可得到合格零件，不影响齿面纤维分布。 |
| 英文摘要: |
| Two distributary processes-one with distributry cavity in the teeth cavity and the other on the top of teeth-were proposed in order to resolve technical problems of cold closed-die forging of spur gear with big modulus. Compared with the traditional process utilizing divided material flow towards axial cavity, these forming processes combining with floating die were analyzed by the method of numerical simulation followed by physical experiments. The results show that these two forming processes are in favor of improvement of the corner filling condition and decreasing the forming force significantly. Forging only needs little turning on excircle or end face which can't damage the fibrous tissue of the teeth. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号