伍太宾.摩托车超越离合器本体冷挤压毛坯的合理选择[J].精密成形工程,2010,2(3):41-45.
Wu Tai-bin.Choice of Blank for the Body of Slip-jaw Clutch in Cold Extrusion[J].Journal of Netshape Forming Engineering,2010,2(3):41-45. |
| 摩托车超越离合器本体冷挤压毛坯的合理选择 |
| Choice of Blank for the Body of Slip-jaw Clutch in Cold Extrusion |
| 投稿时间：2010-02-05 修订日期：2010-05-10 |
| DOI： |
| 中文关键词: 毛坯 冷挤压 超越离合器 摩托车 |
| 英文关键词: blank cold extrusion slip-jaw clutch motorcycle |
| 基金项目: |
|
| 摘要点击次数: 4062 |
| 全文下载次数: 3272 |
| 中文摘要: |
| 首先简要地对超越离合器本体内孔型腔的加工方法作了对比分析，然后分别讨论了圆柱体坯料、台阶形圆柱体坯料、圆环坯料对超越离合器本体内孔型腔冷挤压成形的影响，确定了合适的毛坯形状。结果表明：采用合适的毛坯不仅能有效地降低冷挤压成形力，保证内孔异型型腔的良好成形，还能大幅度提高冲头的使用寿命，提高材料利用率，降低制造成本。 |
| 英文摘要: |
| In view of the shape of the slip-jaw clutch with complex inner-tooth，the key technical problem was to select the shape and dimensions of blank in cold extrusion. The main features of all kinds of manufacturing processes were analyzed briefly in this paper. The effect of the blank including the cylinder billet，the cylinder billet with cone and the ring billet on the difficulty of deformation, degree of filling, quality of inner-tooth and the service life of die etc. was discussed respectively, and the shape and dimensions of blank were determined. The results show that the reasonable choice of blank in cold extrusion can reduce effectively the forming force and the high quality forgings can be obtained, the service life of die and the material utilization can be improved enormously, and the manufacturing cost can be reduced. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号