邱方军,王海民,李能文.温度对挤出吹塑制件壁厚分布及性能的影响[J].精密成形工程,2009,1(2):48-51.
QIU Fang-jun,WANG Hai-min,LI Neng-wen.Influence of Temperature on Parts` Wall Thickness and Properties in Extrusion Blow Molding[J].Journal of Netshape Forming Engineering,2009,1(2):48-51. |
| 温度对挤出吹塑制件壁厚分布及性能的影响 |
| Influence of Temperature on Parts` Wall Thickness and Properties in Extrusion Blow Molding |
| 投稿时间：2009-07-13 修订日期：2009-09-10 |
| DOI： |
| 中文关键词: 挤出吹塑 温度 研究进展 |
| 英文关键词: extrusion blow molding temperature research progress |
| 基金项目:重庆市科委科技攻关计划项目（CSTC2008AC3025） |
|
| 摘要点击次数: 3653 |
| 全文下载次数: 3708 |
| 中文摘要: |
| 为实现挤出吹塑制件壁厚均匀分布和提高制件性能，国内外学者从挤出吹塑过程的3个阶段：型坯成型、型坯吹胀以及制品冷却与固化阶段，研究了温度对制件壁厚分布及其性能的影响情况。分析了温度对其成形及性能的影响，综述了前人研究成果。 |
| 英文摘要: |
| In order to realize uniform wall thickness distribution and improve the performance of extrusion blow molding parts, domestic and foreign scholars have made some research on the extrusion blow molding process in three stages: forming parison, parison inflation, as well as cooling and curing stage. The influence of temperature on the wall thickness distribution of parts, their shapes and their performance is researched. An overview of the results of previous studies is made. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号