文章摘要
崔亚,张治民,于建民,等.多向挤压模具及三通件的成形流动分析[J].精密成形工程,2009,1(2):30-33,64.
CUI Ya,ZHANG Zhi-min,YU Jian-min,et al.Characteristics of Multi-directional Extrusion and the Analysis of Metal Flow for Three Links Components[J].Journal of Netshape Forming Engineering,2009,1(2):30-33,64.
多向挤压模具及三通件的成形流动分析
Characteristics of Multi-directional Extrusion and the Analysis of Metal Flow for Three Links Components
投稿时间:2009-05-21  修订日期:2009-09-10
DOI:
中文关键词: 三通零件  数值模拟  多向主动加载
英文关键词: three links component  numerical simulation  multidirectional initiative loading
基金项目:国防基础科研项目(B3320060311);山西省青年基金(2008021030)
作者单位
崔亚 中北大学研究生院, 太原 030051 
张治民 山西省集成精密成形工程技术研究中心, 太原 030051 
于建民 山西省集成精密成形工程技术研究中心, 太原 030051 
李素丽 山西省集成精密成形工程技术研究中心, 太原 030051 
摘要点击次数: 3780
全文下载次数: 3211
中文摘要:
      利用有限元分析软件Msc Marc来模拟三通阀体零件多向主动加载成形过程。通过对多向同步加载、多向分步加载、多向顺序加载等3种不同成形方式的金属流线,以及加载过程中挤压力曲线的比较,得出了多向分步加载时挤压力曲线平滑,对模具损伤较小,而且不会出现金属折叠,为最佳的加载工艺方案。详细论述了多向分步加载时金属的流动规律,即首先向右方向的凸模1与凹模间的间隙流入,随后才向凸模2与凹模间半圆柱形凸起的空腔流入。
英文摘要:
      The paper introduces the simulation of the multidirectional initiative loading extrusion process of the triple-valve body by finite element analysis software Msc Marc. By comparing different types of shaping and extrusion graph curve in multidirectional synchronous loading, multidirectional progressive loading and multidirectional sequential loading, it shows that multidirectional progressive loading is the optimum process in which extrusion curve is smooth, mold injury is less and no metal folding appears. The details of the metal flow are introduced, that is, metal flows to the rightward clearance between punch one and die first, and then flows to the cavity between punch two and die.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第13926202位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号