| |
| Surface Integrity and Fatigue Properties of Shot Peening Strengthened 7A65 Aluminum Alloy |
| HE Bai-han, ZHOU Wen-long, CHENG Xu, GAI Peng-tao, LI Chun-yan, CHEN Guo-qing, FU Xue-song |
| 2023,15(6):1-10 [Abstract] [View PDF(16.52 M)] |
| |
| Numerical Simulation on Deformation Mechanism of Φ6 mm-2A10 Aluminum Alloy Bars under Electromagnetic Upsetting |
| WANG Ying-yu, ZHANG Jia-wei, HUANG Yun-kai, DENG Hua-kun, CUI Jun-jia, ZHANG Xu |
| 2023,15(6):11-18 [Abstract] [View PDF(11.10 M)] |
| |
| Compression Behavior Analysis of Metal Fiber Crocheted Composite Structures |
| ZHAO Shun-qiu, WU Fei, HONG Yi-hao, CHEN Ya-ting, ZHENG Shi-wei |
| 2023,15(6):19-26 [Abstract] [View PDF(1.32 M)] |
| |
| Forming Process of Mg/Al Composite Tubes Based on Numerical Simulation and Experiment |
| PENG Wei, ZENG Chao-wei, SUN Zhen-wei, YUAN Ting, ZHANG Wei, HU Gang, ZHONG Tao |
| 2023,15(6):27-36 [Abstract] [View PDF(6.89 M)] |
| |
| Neural Network Prediction Model of Deep Drawing TRB Sheet for Wall Thickness Uniformity |
| ZHANG Yu, ZHAO Zhen-xing |
| 2023,15(6):37-45 [Abstract] [View PDF(913.90 K)] |
| |
| Effect of Convex Die Structure on Extrusion Force of Large-section Ribbed Square Cylinder Parts |
| LI Zhi-yong, ZHANG Zhi-min, LI Guo-jun |
| 2023,15(6):46-54 [Abstract] [View PDF(6.19 M)] |
| |
| Effect of Laser Shock Energy on Residual Stress and Surface Morphology of 3D Printed Aluminum Alloy |
| DOU Shi-tao, ZHANG Jin, ZHENG Lin, CAI Ming-yong, XU Wei-sheng, ZHAO Fang-chao, JI Peng-fei, CHEN Xin |
| 2023,15(6):55-61 [Abstract] [View PDF(11.14 M)] |
| |
| Effect of Electromagnetic Casting on Microstructure of Al-Si12.6% Eutectic Alloy |
| LI Bo, LIU Zhuo-yi, HE Jin-hang, SU Jian-feng, SHI Yan, ZHANG Zhi-qing, LIU Shi-feng, LU Jin-ke, SHAO Chun |
| 2023,15(6):62-69 [Abstract] [View PDF(6.04 M)] |
| |
| Drawing Forming Analysis and Process Parameter Optimization of Aluminum Alloy Top Cover of Battery Pack for Electric Vehicle |
| NING Shui-gen, CAO Bing-xin, LU Hong-kun, ZHANG Qing-yong |
| 2023,15(6):70-75 [Abstract] [View PDF(2.44 M)] |
| |
| Thermo-mechanical Coupling Simulation of In-service Welding for Natural Gas Pipelines Based on Abaqus Secondary Development |
| GUO Long-long, CAO Jia-chen, XU Bin-rong |
| 2023,15(6):76-85 [Abstract] [View PDF(36.97 M)] |
| |
| Wear and Stress Analysis of Powder Metallurgy Cycloid Outer Rotor Shaping Die Based on Neural Network |
| YA Hai-long, HE Li-le, LIN Yu-yang, WANG Xing |
| 2023,15(6):86-93 [Abstract] [View PDF(4.58 M)] |
| |
| Experimental Study and Numerical Simulation of Edge Fracture of QP980 Steel Sheet |
| DAI En-kai, LYU Zhi-qin, YUAN Pan-pan, LIU Guo-qiang, GUO Ning, LIU Zhe, TANG Bing-tao |
| 2023,15(6):94-102 [Abstract] [View PDF(15.87 M)] |
| |
| Incremental Bending Loading Path of Q345B Sail-shaped Plates |
| AN Nan, ZHANG Gong-xue, ZHANG Fei-fei, HE Kai |
| 2023,15(6):103-110 [Abstract] [View PDF(4.88 M)] |
| |
| Selective Laser Melting of Blanket First Wall Reduced Scale Component for Fusion Reactor |
| WANG Zhi-yong, WU Jie-feng, LIU Zhi-hong, MA Jian-guo, ZHAI Hua |
| 2023,15(6):111-119 [Abstract] [View PDF(7.39 M)] |
| |
| Effect of Banded Microstructure on Strain Localization and Strain Hardening Behaviors of Microalloyed Steel |
| REN Chun-hua, ZHOU Zhi-shun, XUE Dong-yang, ZHANG Xiao-chuan, JI Hong-wei, KOU Jin-bao |
| 2023,15(6):120-126 [Abstract] [View PDF(6.61 M)] |
| |
| Tribological Properties of Hot Forging Die Flux Cored Wire Cladding Layer by Arc Additive Manufacturing |
| LU Hong-jie, LIU Jian-yong |
| 2023,15(6):127-135 [Abstract] [View PDF(1.50 M)] |
| |
| Effect of Root Forming and Misalignment on Local Strain Concentration Behavior of Girth Weld Joint with Unequal Wall Thickness |
| JIA Hai-dong, MA Hai-long, YU Wen-chang, SUN Pei-xiang, XU Le-le, HAN Bin, LI Li-ying, LI Xue-da |
| 2023,15(6):136-145 [Abstract] [View PDF(7.36 M)] |
| |
| Refinement Prediction of Coarse-grained Structure of GH4720Li Alloy by Thermal Deformation |
| SHA Lei, SUN Jie, ZHAO Zhang-long, WEI Kang, WANG Tao, WAN Zhi-peng |
| 2023,15(6):146-154 [Abstract] [View PDF(4.47 M)] |
| |
| Effect of Rolling Process on Micro-structure and Mechanical Strength of AlCrFe2Ni2 High Entropy Alloy |
| HUA Shao-chun, DING Hua, WAN Yuan-yuan, YU Hai-xiang, LIU Jun-chen, ZHU Cheng-yuan, CHEN Wei-ping |
| 2023,15(6):155-162 [Abstract] [View PDF(1.86 M)] |
| |
| Research Progress of Splashing Behavior in Selective Laser Melting |
| YUAN Mei-xia, LIU Xiao-ke, HUA Ming |
| 2023,15(6):163-173 [Abstract] [View PDF(11.40 M)] |
| |
| Effect of Ultrasonic Treatment on Properties of MWCNTs-NH2 Reinforced Epoxy Bonded Joints |
| WANG Hui, QIU Yi, CHEN Yi-zhe, YANG Liu, CAO Min |
| 2023,15(6):174-182 [Abstract] [View PDF(3.22 M)] |
| |
| Forming Process of Flexible Circuit Based on Aerosol Micro-jet Printing |
| ZHU Tao, ZHANG Yuan-ming, SONG Shi-yu, WANG Zi-wen |
| 2023,15(6):183-192 [Abstract] [View PDF(14.19 M)] |
| |
| Thermo-mechanical Coupling Behavior for Pressure Vessel of WWER Reactor |
| MAO Jian-jun, PAN Rong-jian, QIN Jian-tao, ZHAO Hui, YANG Chong, GUO Dong-xu, SHI Bao-dong, WU Lu |
| 2023,15(6):193-200 [Abstract] [View PDF(2.86 M)] |
| |
| Development and Application of Integrated Digital Manufacturing System for Tube Based on Knowledge Engineering Driving |
| WANG Qiao-ling, LI Guang-jun, ZENG Yuan-song, ZHAO Qing-yun, WEI Zhan-chong |
| 2023,15(6):201-208 [Abstract] [View PDF(2.11 M)] |
| |
| Overview of Extrusion Molding Technology Development |
| HOU Cheng-long, CHENG Ling-ling, HOU Jing-jie, GUO Nan, NIU Fu-chao, SHEN Jia-dong |
| 2023,15(6):209-221 [Abstract] [View PDF(4.04 M)] |
| |