| |
Volume 14,Issue 4,2022 Table of Contents
轻合金精密成形专题 | | | Fracture Behavior of 6016 Aluminum Alloy Based on GISSMO Criterion | | | KONG Jie, DENG Lu-lu, LIU Yi, MIN Jun-ying | | | 2022,14(4):1-10 [Abstract] [View PDF(4.03 M)] | | | | | Constitutive Model of Al-Zn Alloy Hot Forming | | | CHENG Bin-yang, LIU Xiang, LU Jun-jie, PANG Qiu | | | 2022,14(4):11-19 [Abstract] [View PDF(1.14 M)] | | | | | Hot Workability of Ti-6Cr-5Mo-5V-4Al Alloy | | | LI Chang-min, HUANG Liang, ZHAO Ming-jie, GUO Shi-qi, SU Yang, LI Jian-jun | | | 2022,14(4):20-27 [Abstract] [View PDF(7.52 M)] | | | | | Grain Growth Behaviors of γ Phase and Re-dissolution of γ' Phase during Solution Treatment of GH4175 Alloy | | | GUO Hao-kun, LUO Jiao, ZHANG Zhi-gang | | | 2022,14(4):28-37 [Abstract] [View PDF(3.48 M)] | | | | | Grain Refinement Effect of 7075 Aluminum Alloy Thick Plate by Constrained Groove Pressing with Severe Plastic Deformation | | | CHENG Zi-hao, WU Guang-shan, CHEN Fei | | | 2022,14(4):38-45 [Abstract] [View PDF(30.78 M)] | | | | | Numerical Simulation of Multi-directional Forging of TiB2.TiAl3/2024Al Composite | | | ZHANG Hong-ming, LI Xin, LI Yuan, QI Lei, LI Zhi-yong, XIE Chang-hai, ZHENG Jie, GENG Hao-yu, CHEN Gang | | | 2022,14(4):46-54 [Abstract] [View PDF(7.94 M)] | | | | | Prediction and Analysis of Stamping Reduction of High Strength Steel Cap Beam | | | PANG Qiu, LUO Bo-feng, WANG Jun-jie | | | 2022,14(4):55-60 [Abstract] [View PDF(620.27 K)] | | | | | Characterization on Plastic Forming Properties of 5182-O Aluminum Alloy | | | YANG Gang, ZHANG Chong, LOU Yan-shan | | | 2022,14(4):61-68 [Abstract] [View PDF(1.45 M)] | | | | | Plastic Deformation and Foaming Process of 7075 Aluminum Alloy Foam Sandwich Plate Prepared by Friction Stir Welding | | | WU Zheng-jian, PANG Qiu, HU Zhi-li | | | 2022,14(4):69-77 [Abstract] [View PDF(22.68 M)] | | | | | Research Progress in Precise Fabrication of Lightweight Magnesium Alloys by Selective Laser Melting | | | LI Xin-zhi, FANG Xue-wei, CHANG Tian-xing, FENG Cheng-hui, HUANG Ke | | | 2022,14(4):78-93 [Abstract] [View PDF(27.95 M)] | | | | | Fracture Mechanism and Crack Propagation of TC11 Titanium Alloy Melted by Laser Selective Melting under Different Loads | | | HUANG Peng, YU Hai-yang, GUO Ning, ZHOU Qing-jun, TANG Bing-tao, ZHAO Wei, LI Xin-sheng | | | 2022,14(4):94-101 [Abstract] [View PDF(4.54 M)] | | | | | Superplastic Forming/Diffusion Bonding Technology for the Four-layer Hollow Rudder of TA15/Ti2AlNb Alloy | | | WU Yong, ZHOU Xian-jun, WU Di-peng, QIN Zhong-huan, LI Bao-yong, CHEN Ming-he | | | 2022,14(4):102-108 [Abstract] [View PDF(2.15 M)] | | | | | Soft Mold Forming Process of Pure Titanium Bipolar Plate for Fuel Cell | | | ZHANG Yan-jie, LI Bo-bo, TAO Hui-fa, CHI Cheng-zhong, ZHANG Peng, LIN Fei, MENG Ling-jian, LIN Peng, LIU Yin-qi | | | 2022,14(4):109-114 [Abstract] [View PDF(2.56 M)] | | | |
先进焊接与连接 | | | Investigation on Thermal Stability of Electrodeposited Ni-Co Nano-coating and Application in Low Temperature Diffusion Bonding | | | WANG Guo-feng, LIU Yong-kang, CHEN Yu-qing, ZHANG Jing-xuan, WANG Yue-lin | | | 2022,14(4):115-121 [Abstract] [View PDF(21.18 M)] | | | | | Friction Stir Welding Process of 5052/6061 Dissimilar Aluminum Alloy Sheet | | | WANG Yong-qiang, WANG Jin, WANG Meng-ting, LI Bao-ge, ZHANG Hui | | | 2022,14(4):122-128 [Abstract] [View PDF(1.28 M)] | | | | | Effects of Current Mode and Welding Direction on Forming of 316L Stainless Steel Additive Manufacturing | | | PU Bin, TANG He-qing, YAO Ping, XIANG Dan | | | 2022,14(4):129-138 [Abstract] [View PDF(29.31 M)] | | | |
精密铸造 | | | Numerical Simulation and Process Improvement of Shrinkage Defects in Low Pressure Aluminum Castings | | | SHAN Yu, WANG Ye-ji, WANG Feng, MA Jin-yuan, SUI Da-shan | | | 2022,14(4):139-145 [Abstract] [View PDF(6.17 M)] | | | | | Transformation of Precipitates in the As-cast Al-Zn-Mg-Cu-Zr-Sc Alloys during Heat Treatment and Their Effects on Mechanical Properties | | | ZHOU Dian-mai, FAN Jun, HAN Qing-li, LI Jia-heng, ZHANG Ying-bo, XU Bin | | | 2022,14(4):146-153 [Abstract] [View PDF(8.95 M)] | | | |
应用技术 | | | Hot Workability of TC1 Titanium Alloy Sheet | | | ZHU Li, KONG Rong, WU Wei-ping, CHEN Xin-hua, HE Xiao-jian, MENG Bao | | | 2022,14(4):154-161 [Abstract] [View PDF(1.00 M)] | | | | | Optimization of Process Parameters and Analysis of Microstructure and Properties of 18Ni300 by Laser Selective Melting | | | BAI Jing-fei, MA Ya-xin, CHEN Xiao-hui, ZHANG Hong, MEN Zheng-xing, CHEN Cheng, YUE Tai-wen | | | 2022,14(4):162-168 [Abstract] [View PDF(3.08 M)] | | | | | Research Status of Microstructure Control in Additive Manufacturing of Ti-6Al-4V Alloy | | | XU Chao, HE Qing-song, TAN Bin, HUANG Xu, DAI Qing-wei, WANG Peng, TAN Fa-bing | | | 2022,14(4):169-177 [Abstract] [View PDF(6.80 M)] | | | | | Warpage Deformation of Micro Gear Injection Precision Molding Based on Chaotic Particle Swarm | | | LIU Zheng-ping, SHEN Zhong-liang, YAN Guo-chen | | | 2022,14(4):178-182 [Abstract] [View PDF(381.93 K)] | | | |
|
渝公网安备 50010702501719号