| |
Volume 13,Issue 1,2021 Table of Contents
高温合金成形技术及工艺智能化专题 | | | Recent Development of High-temperature Deformation Behavior and Intelligent Processing of Ni-based Superalloy | | | LIN Yong-cheng, CHEN Xiao-min, CHEN Ming-song | | | 2021,13(1):1-18 [Abstract] [View PDF(998.17 K)] | | | | | Effects of Solidification Rate on Microstructure Evolution and Phase Transformation Behavior of Ni/Ni3Al-based Superalloys | | | LI Ye-fan, LI Chong, YU Li-ming, LIU Yong-chang, LI Hui-jun | | | 2021,13(1):19-25 [Abstract] [View PDF(2.71 M)] | | | | | Research Progress in Nickel-based Superalloy 690 | | | YUE Tian-yu, WEN Dong-xu, LI Jian-jun, ZHENG Zhi-zhen | | | 2021,13(1):26-34 [Abstract] [View PDF(503.14 K)] | | | | | Application Status of Numerical Simulation in Precision Forming of Block Casting Turbine | | | LIU Meng-fei, YAO Zhi-hao, DONG Jian-xin | | | 2021,13(1):35-43 [Abstract] [View PDF(2.40 M)] | | | | | Application of Additive Manufacturing Technology in Forming of Superalloy Component | | | MIN Jie, WEN Dong-xu, YUE Tian-yu, LI Jian-jun, ZHENG Zhi-zhen | | | 2021,13(1):44-50 [Abstract] [View PDF(365.19 K)] | | | | | Formability of GH625 Nickel-based Superalloy Strip for Aviation | | | XIAO Na-min, LEI Yu, LUO Jun-jie, KONG Xiang-ren, WANG Zhen, JIA Chong-lin, SHA Ai-xue | | | 2021,13(1):51-60 [Abstract] [View PDF(798.09 K)] | | | | | Dynamic Recrystallization Modeling and Simulation of Inconel 718 Nickel-based Superalloy | | | CHEN Fei, REN Fa-cai | | | 2021,13(1):61-65 [Abstract] [View PDF(1.58 M)] | | | | | Kinetic Behaviors and Prediction Model of Dynamic Recrystallization in GH4169 Alloy during Hot Deformation at Variable Strain Rate | | | HE Dao-guang, LIN Yong-cheng, CHEN Ming-song | | | 2021,13(1):66-71 [Abstract] [View PDF(570.88 K)] | | | | | Grain Growth Behavior after Full Recrystallization in a Nickel-based Superalloy | | | CHEN Xiao-min, LIN Yong-cheng, HU Hong-wei, CHEN Ming-song | | | 2021,13(1):72-77 [Abstract] [View PDF(3.34 M)] | | | | | Uniformly Refining Mechanism and Technology of Mixed-grain for Forged GH4169 Superalloy | | | WANG Guan-qiang, CHEN Ming-song, LIN Yong-cheng, MA Yan-yong | | | 2021,13(1):78-83 [Abstract] [View PDF(665.08 K)] | | | | | Influences of Hatch Distance on Microstructure and Hardness of GH4169 Fabricated by Laser Powder Bed Fusion | | | LIU Yan-xing, SUN Zhen-zhong, ZHANG Yu-xun, ZHANG Bing, WU Jing | | | 2021,13(1):84-87 [Abstract] [View PDF(2.25 M)] | | | | | Microstructure Evolution of GH4698 during Thermal Processing Based on LAM Universe Analysis Technique | | | ZHANG Wen-wen, LIU Xin-gang, DONG Yue, GUO Shu-ling, QIN He-yong, ZUO Zheng | | | 2021,13(1):88-94 [Abstract] [View PDF(695.31 K)] | | | | | Effects of Electropulsing Treatment on Recrystallization Microstructure and Properties of Cold-rolled GH3030 Alloy | | | ZHANG Hong-bin, FANG Rui-rui, DENG Na-na, WANG Yan, ZHOU Hai-ping | | | 2021,13(1):95-104 [Abstract] [View PDF(761.97 K)] | | | | | Principle and Technique of Vacuum Hot Bulge Forming Process of Reactor Coolant Pump Rotor-can | | | CUI Yan, ZHANG Li-wen, ZHANG Chi, LI Fei | | | 2021,13(1):105-110 [Abstract] [View PDF(516.41 K)] | | | | | Forging Process in Electro-hydraulic Hammer of GH901 Turbine Disk | | | LUO Tong, YANG Yang, CHEN Kai-yong, HAN Zong-hui, XU Dong, SI Qing-yang, YUAN Hui, HAO Xiao-xia | | | 2021,13(1):111-120 [Abstract] [View PDF(798.93 K)] | | | | | Precision Forming Technology for Superalloy Casing with 2-meter Diameter | | | WANG Qing, LUO Hong-fei, TONG Jian, WANG Jian-guo, KONG Ling-wei, WU Yong-an, LIU Dong, WANG Hua-dong | | | 2021,13(1):121-126 [Abstract] [View PDF(1.84 M)] | | | | | Effect of Grain Refiner on Microstructure and Stress Rupture Properties of K403 Revert Alloy | | | LI Zi-hang, YU Shi-ya, ZHENG Hang, LIU Feng, WU Kai-xi, TAN Li-ming, TAN Shi-xin, HAO Xin, HUANG Lan | | | 2021,13(1):127-132 [Abstract] [View PDF(2.20 M)] | | | |
应用技术 | | | Deformation Regularity of Aluminum Alloy Boat Shaped Deep-cavity and Thin-walled Part in Hydroforming | | | QIU Chao-bin, GUO Qing-lei, LANG Li-hui, JIANG Pei-cheng, ZHANG Meng, LI Lei, LI Kui, CHEN Lin | | | 2021,13(1):133-138 [Abstract] [View PDF(3.03 M)] | | | | | Research Progress of Additive Manufacturing Technology for Investment Casting Ceramic Shell | | | SU Guo-liang, LIU Hong-jun, LI Ya-min | | | 2021,13(1):139-145 [Abstract] [View PDF(3.39 M)] | | | | | Progress of Cleaning Agents for Electronic Assembly | | | CAO Hua-dong, JIANG Liu-jie, TIAN Mi-zhe, XIA Da-quan, GAN Gui-sheng | | | 2021,13(1):146-152 [Abstract] [View PDF(1.32 M)] | | | |
|
渝公网安备 50010702501719号