| |
Volume 9,Issue 6,2017 Table of Contents
宝钢汽车用钢成形技术专题 | | | Stamping Formability of Ultra High Strength QP980 Steel | | | LYU Chao and CHEN Xin-ping | | | Published 11月 10日, 2017 | | | 2017,9(6):1-5 [Abstract] [View PDF(4.06 M)] | | | | | Key Technology of AHSS DP1000 Hydroforming A Pillar | | | WANG Na, LI Zhi-fan and CHEN Xin-ping | | | Published 11月 10日, 2017 | | | 2017,9(6):6-10 [Abstract] [View PDF(6.34 M)] | | | | | Experimental Study on Hardening Model of IF Steel | | | CHENG Chao, NIU Chao and CHEN Xin-ping | | | Published 11月 10日, 2017 | | | 2017,9(6):11-15 [Abstract] [View PDF(4.14 M)] | | | | | Dynamic Mechanical Properties of 600 MPa Transformation Induced Plasticity Steel | | | LIU Yuan-yuan, CHEN Ming and WEI Xing | | | Published 11月 10日, 2017 | | | 2017,9(6):16-19 [Abstract] [View PDF(2.91 M)] | | | | | Constitutive Model for Dynamic Property of 780 MPa CSP Short Process Dual Phase Steel | | | CHEN Ming, LIU Yuan-yuan and YU Li | | | Published 11月 10日, 2017 | | | 2017,9(6):20-26 [Abstract] [View PDF(5.02 M)] | | | | | Test on Hole Expansion Property for 450~780 MPa Dual Phase Steel Sheets | | | ZHU Hong-chuan, WANG You-lu, WEI Xing and YANG Bing | | | Published 11月 10日, 2017 | | | 2017,9(6):27-31 [Abstract] [View PDF(5.05 M)] | | | | | Analysis and Treatment of Stamping Cracking of Front Longitudinal of Ultra-High Strength Steel | | | CUI Zhen-xiang and YANG Dan | | | Published 11月 10日, 2017 | | | 2017,9(6):32-36 [Abstract] [View PDF(5.75 M)] | | | | | Roll Forming of High Precision Long Sliding Rails with Ultra-High Strength Steel | | | YAN Pei-jie and WANG Chao | | | Published 11月 10日, 2017 | | | 2017,9(6):37-41 [Abstract] [View PDF(4.73 M)] | | | | | Application of 980 MPa AHSS in Rocker Profile Roll-forming Process | | | ZHANG Ji-chao, ZHANG Xiao-jie, SHI Lei and XIAO Hua | | | Published 11月 10日, 2017 | | | 2017,9(6):42-46 [Abstract] [View PDF(4.03 M)] | | | | | Application and Springback Control Technique for HSS from Front Floor Side Rail of Automobile | | | GUO Yun, WU Yan-jun and CHEN Xin-ping | | | Published 11月 10日, 2017 | | | 2017,9(6):47-52 [Abstract] [View PDF(6.28 M)] | | | | | Comparison of Forming Simulation For UHSS Part Based on Autoform and Dynaform | | | NIU Chao, CHEN Xin-ping and CUI Zhen-xiang | | | Published 11月 10日, 2017 | | | 2017,9(6):53-56 [Abstract] [View PDF(3.59 M)] | | | | | Typical Parts Application and Springback Control of Low Alloy Ultra-high Strength Steel HC950LA | | | WEN Zheng-lue, XU Dong-kai and CHEN Xin-ping | | | Published 11月 10日, 2017 | | | 2017,9(6):57-61 [Abstract] [View PDF(5.46 M)] | | | | | Springback Control of Floor Rail Member Made of AHSS QP980 | | | LIU Zhen-wei, WU Yan-jun and MO Yun | | | Published 11月 10日, 2017 | | | 2017,9(6):62-67 [Abstract] [View PDF(6.62 M)] | | | | | Cold Cutting of B1500HS Material after Hot Forming | | | WANG Chen-lei, XU Wei-li and LUO Ai-hui | | | Published 11月 10日, 2017 | | | 2017,9(6):68-72 [Abstract] [View PDF(4.62 M)] | | | | | Simulation Analysis and Experimental Research on Hydro-piercing | | | SU Hai-bo, LIU Gang and CHEN Xin-ping | | | Published 11月 10日, 2017 | | | 2017,9(6):73-78 [Abstract] [View PDF(5.42 M)] | | | | | Performance Comparison Experiment on Typical Structural Members of VRB | | | HAN Fei, ZHANG Wen, XU Wei-li and GAO Yong-sheng | | | Published 11月 10日, 2017 | | | 2017,9(6):79-86 [Abstract] [View PDF(8.00 M)] | | | | | Collision Experiment and Numerical Simulation on Hat-shape Beam by Dual Phase Steel DP600 | | | LI Ya, CHEN Xin-ping and LIAN Chang-wei | | | Published 11月 10日, 2017 | | | 2017,9(6):87-92 [Abstract] [View PDF(4.28 M)] | | | | | Material Analysis and Performance Control Technology of Laser Tailor Welded Side Reinforcement Panel | | | YUAN Zhi-peng, ZHAO Guang-tao and ZHOU Shu | | | Published 11月 10日, 2017 | | | 2017,9(6):93-98 [Abstract] [View PDF(5.21 M)] | | | | | Research on Surface Color Difference of Hot Stamping Part for Al-Si Coating | | | SHAN Ming-dong, XIA Yi-xin, WANG Na, LIU Hai-tao, CAO Qi and ZHANG Dan-rong | | | Published 11月 10日, 2017 | | | 2017,9(6):99-103 [Abstract] [View PDF(4.52 M)] | | | | | Application and Development Trend of Lightweight Technology for Vehicle with Hot Stamping and Hydroforming in Baosteel | | | XIA Yi-xin, WANG Na, CHEN Xin-ping and XU Wei-li | | | Published 11月 10日, 2017 | | | 2017,9(6):104-110 [Abstract] [View PDF(9.93 M)] | | | |
材料与成形性能 | | | Mechanical Properties and Thermal Stability of Nanocrystalline NbMoTaW Refractory High Entropy Alloy Thin Films | | | FENG Xiao-bin, ZHANG Jin-yu, LIU Gang and SUN Jun | | | Published 11月 10日, 2017 | | | 2017,9(6):111-116 [Abstract] [View PDF(5.28 M)] | | | | | Research Progress and Application of Refractory High Entropy Alloys | | | LI Chun-ling, MA Yue, HAO Jia-miao, YAN Yu and WANG Qing | | | Published 11月 10日, 2017 | | | 2017,9(6):117-124 [Abstract] [View PDF(6.07 M)] | | | | | Establishment of High Temperature Constitutive Model of Zr-4 Alloy Based on GA-BP Improved Algorithm | | | CHU Lin-hua, WANG Lian, LI Heng-yu and LI Xiao-shan | | | Published 11月 10日, 2017 | | | 2017,9(6):125-129 [Abstract] [View PDF(4.04 M)] | | | | | Effect of Rare Earths on Microstructure and Properties of Al-Mg-Si Alloy Processed by Continuous Casting-Extrusion | | | YIN Bin, CAO Fu-rong, WANG Shun-cheng, SHI Lu, XU Guang-ming and WEN Jing-lin | | | Published 11月 10日, 2017 | | | 2017,9(6):130-136 [Abstract] [View PDF(8.67 M)] | | | | | Measuring and Analysis of Three-dimensional Residual Stress and Its Distribution in Materials Based on Measurement of Specific Volume | | | CHEN Kun, LIU Ke-jia, LIU Qi and CHEN Hui-fen | | | Published 11月 10日, 2017 | | | 2017,9(6):137-142 [Abstract] [View PDF(4.39 M)] | | | |
工艺优化设计 | | | Review on Preform Design of Complex Component in Forging Process | | | ZHANG Da-wei | | | Published 11月 10日, 2017 | | | 2017,9(6):143-156 [Abstract] [View PDF(9.07 M)] | | | | | Design of Shear Fixture and Cyclic Shear Deformation Behavior of Aluminum Alloys | | | YU Hai-yan, LI Jia-xu and WANG You | | | Published 11月 10日, 2017 | | | 2017,9(6):157-162 [Abstract] [View PDF(6.75 M)] | | | | | Numerical Simulation and Experimental Study on Stamping Process of Metallic Bipolar Plate for PEMFC | | | ZHANG Li-li and WANG Kai-kun | | | Published 11月 10日, 2017 | | | 2017,9(6):163-169 [Abstract] [View PDF(7.12 M)] | | | | | Microstructure and Properties of 7075 High Strength Al-alloy Pulsed MIG Welding Joints | | | CHEN Da-jun, LI Zhong-sheng, DAI Ming-hui, FU Yang-fan and DAI Ye | | | Published 11月 10日, 2017 | | | 2017,9(6):170-174 [Abstract] [View PDF(5.83 M)] | | | | | Axial Flow Simulation and Experimental Verification for Upsetting & Extrusion Process of Crankshaft | | | HU Feng-ze, GUO Ju-shou, YUAN Yu-ting, CAO Yan, LIN Jun and KANG Feng | | | Published 11月 10日, 2017 | | | 2017,9(6):175-181 [Abstract] [View PDF(8.32 M)] | | | | | Forging Technology and Numerical Simulation of Distribution Cabinet Connector | | | SHAO Chao, QIU Jian-xin, HU Xiao-feng and WANG Lei-gang | | | Published 11月 10日, 2017 | | | 2017,9(6):182-186 [Abstract] [View PDF(4.96 M)] | | | | | Finite Element Study on Cold Extrusion Process with Chattering | | | HU Xin-hua, YU Dong-li, YANG Qing-hua and WANG Zhi-heng | | | Published 11月 10日, 2017 | | | 2017,9(6):187-192 [Abstract] [View PDF(7.12 M)] | | | | | Performance of Spray Forming 7055 Aluminum Alloy for Helicopter Hub Materials | | | PAN Ying-xi | | | Published 11月 10日, 2017 | | | 2017,9(6):193-197 [Abstract] [View PDF(4.04 M)] | | | |
|
渝公网安备 50010702501719号