| |
Volume 9,Issue 3,2017 Table of Contents
中国兵工学会压力加工专委会2017年学术年会专栏 | | | The Progress on Mechanical and Corrosion Properties of Nanocrystalline 304 Stainless Steel Plate Produced by Severe Rolling Technique | | | WANG Sheng-gang, SUN Miao and LONG Kang | | | Published 5月 10日, 2017 | | | 2017,9(3):1-7 [Abstract] [View PDF(3.87 M)] | | | | | Superplasticity of Mg-Li System Alloys | | | CAO Fu-rong | | | Published 5月 10日, 2017 | | | 2017,9(3):8-12 [Abstract] [View PDF(760.58 K)] | | | | | Numerical Investigation into the Hydroforming of Aluminum Alloy Automobile Roof Cover | | | LANG Li-hui, WU Yong-kun, CHEN Yang-kai, WANG Yao and SUN Zhi-ying | | | Published 5月 10日, 2017 | | | 2017,9(3):13-18 [Abstract] [View PDF(2.98 M)] | | | | | Deformation Temperature Dependence of Grain Size Evolution in Magnesium Alloys Processed by Equal Channel Angular Pressing in Finite Element Method | | | JIN Zhao-yang, YIN Kai, SHI Wei-wei, MA Heng and YAN Kai | | | Published 5月 10日, 2017 | | | 2017,9(3):19-24 [Abstract] [View PDF(4.59 M)] | | | | | Compressive Large Deformation of PC/ABS at High Strain Rates | | | LI Yang, WANG Hai-tao and ZHANG Yun | | | Published 5月 10日, 2017 | | | 2017,9(3):25-29 [Abstract] [View PDF(1.52 M)] | | | | | Numberical Simulation on Effect of Extrusion Speed on Sheathed Extrusion Process of Ti3Al-Based Alloy | | | LIU Shi-biao, WANG Ke-lu, LU Shi-qiang, LI Xin and XU Qiu-xi | | | Published 5月 10日, 2017 | | | 2017,9(3):30-33 [Abstract] [View PDF(1.85 M)] | | | | | Stamping Process Optimization of Engineering Vehicle Disk Based on ANSYS/LS-DYNA | | | LI Hao and WANG Qiang | | | Published 5月 10日, 2017 | | | 2017,9(3):34-39 [Abstract] [View PDF(3.28 M)] | | | | | Process Optimization for Cold Extrusion of Connection Gear Ring | | | SHI Wei-bing, YIN Qiang, YUAN Hai-bing, LI Ming-ming, GONG Ai-jun and HU Cheng-liang | | | Published 5月 10日, 2017 | | | 2017,9(3):40-44 [Abstract] [View PDF(1.29 M)] | | | | | MIG (Bead) Braze Welding Process of Bearing Band for a Certain Bomb | | | PAN Ling, JIANG Chun-mao, ZHAO Dong-sheng, SUN Jia-li, LIU Hai-yan, HE Bing-sen, WANG Qiu-yu and LIU Yu | | | Published 5月 10日, 2017 | | | 2017,9(3):45-47 [Abstract] [View PDF(1.12 M)] | | | | | Continuous Punching-Finishing Process of Micro-Miniature Gear Pieces | | | LIU Han-xiong, WANG Ruo and LI Xiang-hua | | | Published 5月 10日, 2017 | | | 2017,9(3):48-50 [Abstract] [View PDF(2.13 M)] | | | | | Special Aluminum Alloy Precision Forming Technology and Its Application in the Field of National Defense Science and Technology | | | WANG Yan-yan, WU Mao-yong, QU Hua and YUAN Xun-dao | | | Published 5月 10日, 2017 | | | 2017,9(3):51-54 [Abstract] [View PDF(866.99 K)] | | | |
研究进展 | | | Progress on Melt Overheating Treatment Technology and Its Application in Ni-based Superalloys | | | WANG Hai-feng, SU Hai-jun, ZHANG Jun, HUANG Tai-wen, GUO Min, LIU Lin and FU Heng-zhi | | | Published 5月 10日, 2017 | | | 2017,9(3):55-64 [Abstract] [View PDF(11.68 M)] | | | | | Research Status and Development Tendency of Electrohydraulic Forming (EHF) Technology | | | YU Hai-ping, ZHENG Qiu-li and AN Yun-lei | | | Published 5月 10日, 2017 | | | 2017,9(3):65-72 [Abstract] [View PDF(3.04 M)] | | | |
工艺优化设计 | | | Hot Deformation Behavior of NF709 Austenitic Heat-resistant Steel | | | BAO Han-sheng, WANG Jing-zhong, LIU Zheng-dong, CHEN Zheng-zong and CHENG Jie-feng | | | Published 5月 10日, 2017 | | | 2017,9(3):73-78 [Abstract] [View PDF(3.22 M)] | | | | | Cross-necking Phenomenon in Uniaxial Tensile Tests and Finite Element Analysis of DP600 Dual Phase Steel | | | WANG Chuan-qiao, GAO Zhi-chun and E Da-xin | | | Published 5月 10日, 2017 | | | 2017,9(3):79-82 [Abstract] [View PDF(1.29 M)] | | | | | Influences of Different Post-treatments on Microstructure and Cutting Performance of MT-TiCN Coated Cutting Tool | | | DU Li-ye, QIU Lian-chang, DU Yong, ZHONG Zhi-qiang and SHI Hai-dong | | | Published 5月 10日, 2017 | | | 2017,9(3):83-88 [Abstract] [View PDF(1.91 M)] | | | | | Numerical Analysis and Life Prediction of Die Wear Behavior in Multi-Position Progressive Die Blanking | | | XIONG Ying-chao, XIA Qin-xiang, YE Fu-yuan and CHEN Zhi-ping | | | Published 5月 10日, 2017 | | | 2017,9(3):89-93 [Abstract] [View PDF(1.57 M)] | | | | | Main Blanking Force Calculation and Experimental Verification of Closed-Extruding Fine Blanking based on Slip Line Field | | | LYU Lin, WANG Ruo-huang, MA Yi-long and DENG Ming | | | Published 5月 10日, 2017 | | | 2017,9(3):94-97 [Abstract] [View PDF(1.09 M)] | | | | | Effects of Wavelength on Incremental Pressing Forming of Sheet Metal | | | WANG Xiao-lian, WANG Jin, ZHOU Peng and LIU Qi | | | Published 5月 10日, 2017 | | | 2017,9(3):98-101 [Abstract] [View PDF(2.98 M)] | | | | | Feasibility of Two-Point Incremental Forming Mould in 3D Printing | | | ZHOU Peng, WANG Jin, WANG Xiao-lian and LIU Qi | | | Published 5月 10日, 2017 | | | 2017,9(3):102-106 [Abstract] [View PDF(1.45 M)] | | | |
应用技术 | | | Metal Armored MI Cable for Motor Winding | | | YANG Xiao-chen, YU Tian-da and YANG Fang-liang | | | Published 5月 10日, 2017 | | | 2017,9(3):107-110 [Abstract] [View PDF(1.28 M)] | | | | | New Nondestructive Testing Technology of Welding Quality | | | YANG Jie, LI Lu-ke and SHEN Hua-gang | | | Published 5月 10日, 2017 | | | 2017,9(3):111-114 [Abstract] [View PDF(1.32 M)] | | | | | Design of New High-flexible Hook Cold-bending Forming Machine | | | SHEN Xin-gang, SUN Qian-li, PENG Ming-hua and HE Li-ming | | | Published 5月 10日, 2017 | | | 2017,9(3):115-119 [Abstract] [View PDF(1.55 M)] | | | |
|
渝公网安备 50010702501719号