| |
Volume 4,Issue 2,2012 Table of Contents
理论与试验研究 | | | Critical Conditions of Dynamic Recrystallization during High Speed Hot Deformation of Inconel 625 Alloy | | | TAO Lin, CHENG Ming, SONG Guang-sheng and ZHANG Shi-hong | | | Published 3月 10日, 2012 | | | 2012,4(2):1-5 [Abstract] [View PDF(3.11 M)] | | | | | The Microstructure Properties and Forming Process of High Strength Automotive TRIP Steel | | | LU Hong-zhou, LI Bin, Wu E-mei, MEI Hua-sheng and WANG Yu-hui | | | Published 3月 10日, 2012 | | | 2012,4(2):6-9 [Abstract] [View PDF(3.48 M)] | | | | | Workpiece Hole Diameter Effect on Vibration Signal Produced from Cold Extruding Internal Thread | | | LIANG Yu-xuan, LI Xiang-feng, ZUO Dun-wen, ZHANG Min and MIAO Hong | | | Published 3月 10日, 2012 | | | 2012,4(2):10-14,35 [Abstract] [View PDF(4.32 M)] | | | | | Influences of Tools Gap on Formability and Springback of Thin-walled Tube during Rotary Bending | | | YU Hai-yan, AI Chen-chen and SUN Zhe | | | Published 3月 10日, 2012 | | | 2012,4(2):15-18,31 [Abstract] [View PDF(3.66 M)] | | | | | Effects of Clearance on Cross Sectional Distortion and Wall Thickness Variation of 5A06 Tube | | | ZHANG Jing-wen, E Da-xin, LI Yan-min and TIAN Xin | | | Published 3月 10日, 2012 | | | 2012,4(2):19-22 [Abstract] [View PDF(3.27 M)] | | | | | Study of Serrated Yielding in 6063 Aluminium Alloy Board | | | SUN Ping, LIU Cheng and WANG Hui | | | Published 3月 10日, 2012 | | | 2012,4(2):23-26,71 [Abstract] [View PDF(3.39 M)] | | | | | FEM Analysis of Structure Stiffness and Strength for Hydraulic Shear Stand in Cold Roll Forming | | | ZHU Ye, YANG Xiao-ming, WEN Jin-fen and LIU Jiang-lin | | | Published 3月 10日, 2012 | | | 2012,4(2):27-31 [Abstract] [View PDF(3.48 M)] | | | | | Superplastic Welding of Cr12MoV Steel after High Frequency Surface Quenching | | | WANG Bing-ying, YUAN Xiao-mei and LIU Shuai | | | Published 3月 10日, 2012 | | | 2012,4(2):32-35 [Abstract] [View PDF(3.29 M)] | | | | | The Numerical Simulation and Experimental Analysis on 3-rolls Skew Rolling Process | | | LI Zhen-xue and YAO Dong-hong | | | Published 3月 10日, 2012 | | | 2012,4(2):36-39 [Abstract] [View PDF(4.14 M)] | | | |
应用技术 | | | Failure Forms and Restoration Methods of the Automotive Front Axle Roll Forging Die | | | WANG Hong-qiang, JI Cheng-cheng and XIA Hua | | | Published 3月 10日, 2012 | | | 2012,4(2):40-41,53 [Abstract] [View PDF(3.15 M)] | | | | | Numerical Simulation of Die Casting Technology on Aluminium Alloy and Its Analysis | | | JIANG Zheng and XUE Ke-min | | | Published 3月 10日, 2012 | | | 2012,4(2):42-45,71 [Abstract] [View PDF(3.69 M)] | | | | | The Research and Application of Metal Injection Molding in Weapon Fields | | | CHEN Hong-zhang, ZENG Fan-tong and TANG Kai | | | Published 3月 10日, 2012 | | | 2012,4(2):46-53 [Abstract] [View PDF(8.29 M)] | | | | | Effects of Different Activators in the Flux on the Corrosivity of Lead-free Electronic Micro Joining Circuit | | | LIU Bin, HUANG Wen-chao and WANG Tao | | | Published 3月 10日, 2012 | | | 2012,4(2):54-59,77 [Abstract] [View PDF(9.72 M)] | | | | | Numerical Simulation on the Roll-forging and Die-forging of Aluminum Alloy Control Arms | | | ZHANG Hui, SHI Wen-chao, YANG Da-qiang, LI Xiao-dong and XUE Ke-min | | | Published 3月 10日, 2012 | | | 2012,4(2):60-63,66 [Abstract] [View PDF(4.21 M)] | | | | | Necking Process and Die Design of Control Link Screw Tube | | | XING Tao, HUANG Lin and NIE Lan-qi | | | Published 3月 10日, 2012 | | | 2012,4(2):64-66 [Abstract] [View PDF(2.22 M)] | | | | | Assembly and Setting of the Stamping End Picking-up Device | | | ZHAO Jian-hui and XU Zhi-gang | | | Published 3月 10日, 2012 | | | 2012,4(2):67-71 [Abstract] [View PDF(3.86 M)] | | | | | The Die Design for Excavator Plate of Stick | | | LIU Jian-chang, NI Wen-bin, LIU Yong-hua and SHAO Ming-lei | | | Published 3月 10日, 2012 | | | 2012,4(2):72-74 [Abstract] [View PDF(2.47 M)] | | | | | Deep Drawing Forming Technique for Thin-wall Hemispherical Workpieces | | | XU Lian-fu, ZHAO Hong-tu, LI Yan-jing, LI Xin, XU Yan-bing and NIE Lan-qi | | | Published 3月 10日, 2012 | | | 2012,4(2):75-77 [Abstract] [View PDF(2.18 M)] | | | | | Dynamics Study on Horizontal Screw Jack | | | XIE Hai-dong and YU Yan | | | Published 3月 10日, 2012 | | | 2012,4(2):78-81 [Abstract] [View PDF(2.87 M)] | | | | | The Acoustics Loudspeaker's Spray Mold | | | LIU Yong | | | Published 3月 10日, 2012 | | | 2012,4(2):82-85 [Abstract] [View PDF(2.66 M)] | | | |
老教授谈
|
渝公网安备 50010702501719号