曾向东.西安航天发动机厂, 西安 710100[J].精密成形工程,2014,6(2):24-31.
ZENG Xiang-dong.Spinning Processing of Niobium Alloy Parts[J].Journal of Netshape Forming Engineering,2014,6(2):24-31. |
| 西安航天发动机厂, 西安 710100 |
| Spinning Processing of Niobium Alloy Parts |
| 投稿时间：2013-11-06 修订日期：2014-03-01 |
| DOI：10.3969/j.issn.1674-6457.2014.02.005 |
| 中文关键词: 铌合金 强力旋压 类型与方法 加工方案 |
| 英文关键词: niobium alloy powerful spinning types and methods processing proposal |
| 基金项目: |
|
| 摘要点击次数: 7830 |
| 全文下载次数: 3729 |
| 中文摘要: |
| 目的 归纳总结常见类型铌合金零件进行强力旋压加工的可行性及加工方法和要点。 方法 通过分析、分类、举例、实验、对比等多种方式方法,从材料的可旋性、零件特征、工艺分析、加工工艺、加工要点、工艺实施、措施应对等方面进行归纳总结和论述。 结果 验证了铌合金材料进行强力旋压加工的可行性及特点。 结论 铌合金零件的强力旋压加工是可行的,不同类型的零件所需的加工手段、方法各异。 技术上有一定的难度,随着产品多样性的发展,还需要进行更深入的探索和研究。 |
| 英文摘要: |
| Objective To summary the feasibility of spinning processing for common-type niobium alloy parts and its processing methods and key points. Methods The methods were summarized and discussed by using the experiment analysis, classification, illustration, contrast, etc. from many different points, such as the rotatablility, parts characteristics,process analysis, process key points, technology, process materials and measures. Results The feasibility and characteristics of powerful spinning of niobium alloy were verified. Conclusion The spinning processing of niobium alloy parts is feasible. Processing of different types of parts need to be done in different ways. There is a certain degree of difficulty in technology, with the development of the diversity of products more in-depth exploration and research are required. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号