文章摘要
李昌永,黄钧崴,周涛,等.对击锤与液压机锻造GH4169盘件组织与性能分析[J].精密成形工程,2023,15(1):182-189.
LI Chang-yong,HUANG Jun-wei,ZHOU Tao,et al.Differences in Microstructure and Properties of GH4169 Discs Forged by Counter-blow Hammer and Hydraulic Press[J].Journal of Netshape Forming Engineering,2023,15(1):182-189.
对击锤与液压机锻造GH4169盘件组织与性能分析
Differences in Microstructure and Properties of GH4169 Discs Forged by Counter-blow Hammer and Hydraulic Press
  
DOI:10.3969/j.issn.1674-6457.2023.01.022
中文关键词: GH4169涡轮盘  数值模拟  对击锤  等温锻压机  组织性能差异
英文关键词: GH4169 turbine disk  numerical simulation  counter-blow hammer  isothermal forging press  differences in microstructure and properties
基金项目:国家自然科学基金(52101052);重庆市自然科学基金(cstc2020jcyj?msxmX0046)
作者单位
李昌永 中国航发沈阳黎明航空发动机有限责任公司沈阳 110043 
黄钧崴 西北工业大学 材料学院西安 710072 
周涛 中国航发沈阳发动机研究所沈阳 110043 
王建国 西北工业大学 材料学院西安 710072 
秦卫东 陕西宏远航空锻造有限责任公司陕西 咸阳 713801 
谭志刚 中国航发沈阳黎明航空发动机有限责任公司沈阳 110043 
刘东 西北工业大学 材料学院西安 710072 
石永召 西北工业大学 材料学院西安 710072 
摘要点击次数: 872
全文下载次数: 376
中文摘要:
      目的 揭示在对击锤与液压机模锻工艺下盘件的组织与性能差异,为锻造工艺选择和指导生产实践提供理论依据。方法 采用数值模拟方法,对GH4169涡轮盘在63TM对击锤和200MN等温锻压机上的成形过程进行对比分析,通过对不同工艺制备的GH4169合金经直接时效后进行组织形貌观察和力学性能测试,探究对击锤模锻与液压机等温模锻GH4169合金盘件的组织与性能差异。结果 2种工艺下盘件的等效应变分布差异不大,但液压机成形盘件的温度比锤锻高,且温度分布的均匀性略优;对击锤模锻的GH4169合金内留存高密度位错,有效促进 相形核,沉淀强化相的增多使其具有更高的抗拉和屈服强度。结论 与液压机锻造相比,锤锻GH4169合金盘件具有更好的综合性能。
英文摘要:
      The work aims to study the differences in the organization and properties of discs forged by counter-blow hammer and hydraulic press, so as to provide theoretical foundation for selection of forging process and guidance of production. Numerical simulations were used to compare and analyze the forming process of GH4169 turbine discs on 63TM counter-blow hammer and 200MN isothermal forging press, and the differences in the organization and properties of GH4169 alloy discs prepared by different processes were investigated by observing the tissue morphology and mechanical properties after direct aging of GH4169 alloy prepared by different processes and by isothermal die forging GH4169 discs on counter-blow hammer and hydraulic press. It was found that the differences in the distribution of the isothermal transformation between the two discs were not significant, but the temperature of the hydraulically formed discs was higher than that of the hammer forging, and the uniformity of the temperature distribution was slightly better. The high density of dislocations in the hammer die-forged GH4169 alloy effectively promoted the nucleation of the γ" phase, and the increase of the precipitation strengthening phase made the hammer-forged GH4169 alloy have a higher overall performance than the hydraulic forging alloy. Compared with those forged by hydraulic press, GH4169 alloy discs prepared by hammer have better overall properties.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081990位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号