文章摘要
王小婷,马胜强,何学斌,等.金属间化合物抗锌液腐蚀的研究进展与发展方向[J].精密成形工程,2022,14(11):143-152.
WANG Xiao-ting,MA Sheng-qiang,HE Xue-bin,et al.Research Progress and Developing Direction of Intermetallic Compounds Against Zinc Liquid Corrosion[J].Journal of Netshape Forming Engineering,2022,14(11):143-152.
金属间化合物抗锌液腐蚀的研究进展与发展方向
Research Progress and Developing Direction of Intermetallic Compounds Against Zinc Liquid Corrosion
  
DOI:10.3969/j.issn.1674-6457.2022.11.014
中文关键词: 金属间化合物  锌液腐蚀  扩散反应  热镀锌  腐蚀机理
英文关键词: intermetallic compounds  liquid zinc corrosion  diffusion reaction  hot-dip galvanizing  corrosion mechanism
基金项目:国家自然科学基金(52071254,52271069);陕西省“四主体一联合”锌基新材料校企联合研究中心(陕科办发[2021]118号);陕西锌业有限公司委托课题(20211136,20220474)。
作者单位
王小婷 西安交通大学 金属材料强度国家重点实验室西安 710049
陕西省“四主体一联合”锌基新材料校企联合研究中心西安 710049 
马胜强 西安交通大学 金属材料强度国家重点实验室西安 710049
陕西省“四主体一联合”锌基新材料校企联合研究中心西安 710049 
何学斌 陕西省“四主体一联合”锌基新材料校企联合研究中心西安 710049
陕西锌业有限公司陕西 商洛 726007 
吕萍 西安交通大学 金属材料强度国家重点实验室西安 710049
陕西省“四主体一联合”锌基新材料校企联合研究中心西安 710049 
马高峰 陕西省“四主体一联合”锌基新材料校企联合研究中心西安 710049
陕西锌业有限公司陕西 商洛 726007 
张健康 陕西省“四主体一联合”锌基新材料校企联合研究中心西安 710049
陕西锌业有限公司陕西 商洛 726007 
邢建东 西安交通大学 金属材料强度国家重点实验室西安 710049
陕西省“四主体一联合”锌基新材料校企联合研究中心西安 710049 
摘要点击次数: 1158
全文下载次数: 512
中文摘要:
      综述了几种典型的金属间化合物在液态锌中的腐蚀行为及机理,归纳了Fe3Al、TiAl、Fe2B等不同结构金属间化合物在锌液中的反应特性和腐蚀后的界面失效形式,提出了金属间化合物在锌液中生成表面致密连续腐蚀抑制层或提高锌液腐蚀产物层的黏附力、抗剥落性能和界面元素阻扩散层的防护策略和材料设计方法,明确了金属间化合物在抗锌液腐蚀工程装备应用中的关注焦点和未来发展方向,为静态和流动条件下金属间化合物抗锌液腐蚀机理和抗蚀材料的开发提供了研究思路。
英文摘要:
      In this paper, the corrosion behavior and mechanism of several typical intermetallic compounds in liquid zinc are summarized. The reaction characteristics and interface failure modes of different structure intermetallic compounds such as Fe3Al, TiAl and Fe2B in liquid zinc are reviewed. It is suggested that a protective oxide film or corrosion-inhibited layer rapidly generated in the surface of the alloy may improve liquid zinc corrosion resistance and the spalling resistance and good adhesion performance of corrosion products by using adding Cr, Al and Si beneficial elements and forming corrosion-resistant phases as a strategy and the material design route. Besides, some future focus and developing direction for corrosion resistance to liquid zinc are proposed for the applications of hot-dip galvanizing in engineering equipment service (e.g. submerged rolls, stabilizer roll, etc.) in the paper. In addition, the static and flow condition corrosion damage of liquid zinc and the development of corrosion resistant material are suggested as the future research ideas in liquid zinc corrosion.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12298698位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号