文章摘要
胡锐,李劲光,周咪,等.TiAl合金复合韧化及其复合材料研究进展[J].精密成形工程,2022,14(11):133-142.
HU Rui,LI Jin-guang,ZHOU Mi,et al.Recent Advance on Toughening of TiAl Composite and TiAl Matrix Composites[J].Journal of Netshape Forming Engineering,2022,14(11):133-142.
TiAl合金复合韧化及其复合材料研究进展
Recent Advance on Toughening of TiAl Composite and TiAl Matrix Composites
投稿时间:2022-07-04  
DOI:10.3969/j.issn.1674-6457.2022.11.013
中文关键词: TiAl基复合材料  颗粒  连续纤维  涂层  多尺度韧化
英文关键词: TiAl-based composites  particle  continuous fiber  coating  multiscale toughening
基金项目:国家自然科学基金(51971176)
作者单位
胡锐 西北工业大学 凝固技术国家重点实验室西安 710072 
李劲光 西北工业大学 凝固技术国家重点实验室西安 710072 
周咪 西北工业大学 凝固技术国家重点实验室西安 710072 
罗贤 西北工业大学 凝固技术国家重点实验室西安 710072 
摘要点击次数: 1039
全文下载次数: 664
中文摘要:
      TiAl合金具有低密度、高比强度及优异的高温性能等特点,成为航空航天领域极具发展潜力的轻质高温结构材料。然而,TiAl合金在室温下断裂韧性较低及800 ℃以上时热稳定性不佳等问题限制了该合金的应用,解决这些难题的重要方向之一是发展TiAl基复合材料。介绍了近年来国内外对TiAl基复合材料研究的进展情况,主要包括颗粒、连续纤维及改性涂层纤维增强增韧TiAl基复合材料的研究,并对未来TiAl基复合材料的发展方向提出展望。
英文摘要:
      TiAl alloy with low density, high specific strength and excellent high-temperature properties has been regarded as a potential high-temperature light structural material for use in aerospace. However, insufficient fracture toughness at room temperature and poor thermostability above 800 ℃ have limited its application. One of the important ways to solve these problems is to develop TiAl-based composites. In this paper, the research progress of TiAl-based composites at home and abroad in recent years is introduced, including researchs of TiAl matrix composites reinforced and toughened by particles, continuous fibers and the fibers modified by coating reinforced TiAl-based composites. Meanwhile, the development direction of the TiAl-based composites in the future is prospected.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12298701位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号