文章摘要
王忠堂,刘永哲,王明浩,等.基于复合变形的镁合金动态再结晶及晶粒尺寸研究[J].精密成形工程,2021,13(4):115-120.
WANG Zhong-tang,LIU Yong-zhe,WANG Ming-hao,et al.Study on Dynamic Recrystallization and Grain Size of Magnesium Alloy Based on Compound Deformation[J].Journal of Netshape Forming Engineering,2021,13(4):115-120.
基于复合变形的镁合金动态再结晶及晶粒尺寸研究
Study on Dynamic Recrystallization and Grain Size of Magnesium Alloy Based on Compound Deformation
投稿时间:2020-10-04  
DOI:10.3969/j.issn.1674-6457.2021.04.016
中文关键词: AZ31  镁合金  复合变形  动态再结晶  晶粒尺寸
英文关键词: AZ31  magnesium alloy  IFCDT  dynamic recrystallization  grain size
基金项目:国家自然科学基金(51575366);辽宁省教育厅资助(LG201701)
作者单位
王忠堂 沈阳理工大学 材料科学与工程学院沈阳 110159 
刘永哲 沈阳理工大学 材料科学与工程学院沈阳 110159 
王明浩 沈阳理工大学 材料科学与工程学院沈阳 110159 
梁海成 沈阳理工大学 材料科学与工程学院沈阳 110159 
摘要点击次数: 1693
全文下载次数: 624
中文摘要:
      目的 研究复合变形工艺参数对镁合金动态结晶体积分数及镁合金晶粒度的影响规律。方法 采用镁合金板材压痕-压平复合变形技术、扫描电子显微镜和EBSD等材料性能先进检测技术,获得经过复合变形后的镁合金材料的微观组织及动态结晶体积分数、镁合金的晶粒度等相关数据。结果 当变形温度为350 ℃、复合变形系数为0.375时,动态再结晶体积分数达到94%。当变形温度为400 ℃、复合变形系数为0.375时,平均晶粒尺寸达到3.2 μm。结论 在镁合金压痕-压平复合变形工艺中,随着变形温度的提高及复合变形系数的增大,AZ31镁合金的动态再结晶体积分数随之提高。随着变形温度的升高和复合变形系数的增大,AZ31镁合金的晶粒尺寸随之减小,晶粒得到细化。
英文摘要:
      The objective is to study the effect of compound deformation parameters on dynamic crystallization integral and grain size of magnesium alloys. The indentation-flattening compound deformation technology (IFCDT), scanning electron microscopy and EBSD advanced testing technology for material properties were adopted to abtain microstructure and relevant data of dynamic recrystallized volume fraction and grain size of magnesium alloy, which was deformed by IFCDT. When the deformation temperature is 350 ℃ and the IFCDT coefficient is 0.375, the dynamic recrystallized volume fraction reaches 94%. The average grain size reaches 3.2 μm when the deformation temperature is 400 ℃ and the IFCDT coefficient is 0.375. The results show that the dynamic recrystallized volume fraction increases with the increase of deformation temperature in the process of IFCDT and the increase of IFCDT coefficient, and, with the increase of deformation temperature and IFCDT coefficient, the grain of AZ31 magnesium alloy is refined.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081432位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号