刘梦飞,姚志浩,董建新.数值模拟在整铸涡轮精密成形中的应用现状[J].精密成形工程,2021,13(1):35-43.
LIU Meng-fei,YAO Zhi-hao,DONG Jian-xin.Application Status of Numerical Simulation in Precision Forming of Block Casting Turbine[J].Journal of Netshape Forming Engineering,2021,13(1):35-43. |
| 数值模拟在整铸涡轮精密成形中的应用现状 |
| Application Status of Numerical Simulation in Precision Forming of Block Casting Turbine |
| 投稿时间：2020-08-25 |
| DOI：10.3969/j.issn.1674-6457.2021.01.004 |
| 中文关键词: 整铸涡轮 高温合金 精密成形 铸造软件 数值模拟 |
| 英文关键词: block casting turbine superalloy precision forming casting software numerical simulation |
| 基金项目:中央基本科研业务费(FRF-GF-19-001);科研项目(KZ3B190114) |
|
| 摘要点击次数: 1856 |
| 全文下载次数: 1003 |
| 中文摘要: |
| 随着计算方法和铸造工艺的发展，数值模拟技术在铸造领域中得到了广泛应用。涡轮作为发动机上的重要热端部件，其结构伴随着发动机的更新换代，向着精密化、轻量化、薄壁化方向发展，数值模拟技术也成为铸造工作者控制涡轮质量的重要手段。目前相关学者通过铸造模拟软件对涡轮精密成形的充型过程与宏观物理场结果进行分析，依据模拟结果来改善铸造工艺，从而提高涡轮质量。综述了数值模拟技术在整铸涡轮精密成形研究中的应用现状，详细介绍为了提高模拟效率，在几何建模、网格划分等前处理过程的注意事项，并分析涡轮铸件充型过程、温度场和应力场模拟结果对缺陷预测和工艺优化的作用，指出整铸涡轮微观组织模拟的发展方向与涡轮铸件数值模拟进一步发展需要解决的问题。 |
| 英文摘要: |
| With the development of calculation methods and casting technology, numerical simulation technology has been widely used in casting field. As an important hot-end component of the engine, turbine is developing towards precision, lightweight and thin-walled in terms of structure with the upgrading of the engine. Numerical simulation technology also becomes an important means for foundry workers to control turbine quality. At present, relevant scholars use casting simulation software to analyze the filling process of turbine precision forming and macroscopic physical field results, and improve the casting process based on the simulation results, thereby improving the quality of turbines. In this paper, the application status of numerical simulation technology in the research of precision forming of casting turbine was reviewed. To improve the simulation efficiency, the precautions in geometric modeling, meshing and other pre-processing processes were introduced in detail, and the effects of the simulation results of turbine casting filling process, temperature field and stress field on defect prediction and process optimization were also analyzed. The development direction of the microstructure simulation of the cast turbine and the problems that needs to be solved in the further development of the numerical simulation of turbine castings were pointed out. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号