文章摘要
李叶凡,李冲,余黎明,等.凝固速度对Ni/Ni3Al基高温合金组织演变及相变行为的影响[J].精密成形工程,2021,13(1):19-25.
LI Ye-fan,LI Chong,YU Li-ming,et al.Effects of Solidification Rate on Microstructure Evolution and Phase Transformation Behavior of Ni/Ni3Al-based Superalloys[J].Journal of Netshape Forming Engineering,2021,13(1):19-25.
凝固速度对Ni/Ni3Al基高温合金组织演变及相变行为的影响
Effects of Solidification Rate on Microstructure Evolution and Phase Transformation Behavior of Ni/Ni3Al-based Superalloys
投稿时间:2020-11-05  
DOI:10.3969/j.issn.1674-6457.2021.01.002
中文关键词: Ni/Ni3Al基高温合金  凝固速度  凝固组织  相变
英文关键词: Ni/Ni3Al-based superalloy  solidification rate  solidification structure  phase transformation
基金项目:国家自然科学基金(51774212);天津市自然科学基金(20JCYBJC00950)
作者单位
李叶凡 天津大学 材料科学与工程学院天津 300350 
李冲 天津大学 材料科学与工程学院天津 300350 
余黎明 天津大学 材料科学与工程学院天津 300350 
刘永长 天津大学 材料科学与工程学院天津 300350 
李会军 天津大学 材料科学与工程学院天津 300350 
摘要点击次数: 1638
全文下载次数: 1274
中文摘要:
      Ni/Ni3Al基高温合金因其优异的高温强度、抗氧化性能和抗蠕变能力等优点,被广泛应用于航空航天等领域。简要介绍了凝固速度对Ni/Ni3Al基高温合金中γ′,β相以及碳化物等析出相的组织演变及相变行为的影响,为Ni/Ni3Al基高温合金非平衡凝固的研究开发及组织调控提供借鉴和指导。Ni/Ni3Al基高温合金中γ′,β相以及碳化物等析出相对凝固过程中的冷却速度十分敏感。在高凝固速度下,这些析出相会呈现与低冷却速度凝固截然不同的组织特征,高凝固速度会使合金中γ′尺寸显著减小,形貌倾向于球形,β相发生马氏体相变等,并最终对合金的综合性能产生重要影响。
英文摘要:
      Ni/Ni3Al-based superalloys are widely used in aerospace and other fields because of their excellent high temperature strength, oxidation resistance and creep resistance. In the work, the effect of solidification rate on the microstructure evolution and phase transformation behavior (γ′, β phase and carbide precipitates) in Ni/Ni3Al-based superalloys were reviewed. It provides reference and guidance for the research and microstructure control of non-equilibrium solidification technology for Ni/Ni3Al-based superalloys. The precipitates of γ′, β and carbides in Ni/Ni3Al-based superalloys are very sensitive to the cooling rate during solidification. At high solidification rate, these precipitates present different microstructure characteristics from low solidification rate. High solidification rate can significantly reduce the size of γ′ phase and make their morphology tend to be spherical. What is more, martensitic transformation occurs in β phase. As a consequence, high solidification rate finally has an important impact on the comprehensive properties of the alloys.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081512位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号