文章摘要
梁少兵,王凯,丁东红,等.电弧增材制造路径工艺规划的研究现状与发展[J].精密成形工程,2020,12(4):86-93.
LIANG Shao-bing,WANG Kai,DING Dong-hong,et al.Research Status and Development of Wire Arc Additive Manufacturing Path Planning[J].Journal of Netshape Forming Engineering,2020,12(4):86-93.
电弧增材制造路径工艺规划的研究现状与发展
Research Status and Development of Wire Arc Additive Manufacturing Path Planning
投稿时间:2020-05-06  修订日期:2020-07-10
DOI:10.3969/j.issn.1674-6457.2020.04.009
中文关键词: 电弧增材制造  填充路径  综述  展望
英文关键词: wire arc additive manufacture  filling path  overview  expectation
基金项目:广东省科学院实施创新驱动发展能力建设专项资金(2018GDASCX-0113);广东省科学院2016年度引进高层次领军人才专项(2016GDASRC-0203)
作者单位
梁少兵 1. 佛山科学技术学院广东 佛山 5282252. 广东省焊接技术研究所(广东省中乌研究院)广州 510650 
王凯 1. 佛山科学技术学院广东 佛山 528225 
丁东红 1. 佛山科学技术学院广东 佛山 528225 
牛犇 2. 广东省焊接技术研究所(广东省中乌研究院)广州 510650 
陈俊孚 2. 广东省焊接技术研究所(广东省中乌研究院)广州 510650 
易江龙 2. 广东省焊接技术研究所(广东省中乌研究院)广州 510650 
郭春富 2. 广东省焊接技术研究所(广东省中乌研究院)广州 510650 
摘要点击次数: 2745
全文下载次数: 1988
中文摘要:
      路径工艺的合理规划对电弧增材制造成形过程的顺利进行,以及获取更高精度的成形件和提高成形效率等均有重要意义。先从成形效率、成形精度以及组织性能等方面,对常见的几种填充路径进行综述,然后经过分析总结并且结合实际情况,发现把自适应路径间距和复合式填充路径结合起来更能满足实际生活中的电弧增材制造生产要求,最后结合当前电弧增材制造技术路径规划的研究现状、研究重难点以及相关国家政策指出,电弧增材制造技术的未来发展趋势是实现复杂构件的自动化、智能化和绿色化制造。
英文摘要:
      The reasonable planning of the path technology is of great significance to the smooth progress of the forming process of the arc additive manufacturing, the acquisition of higher precision parts and the improvement of the forming efficiency. In this paper, several common filling paths were summarized from the aspects of forming efficiency, forming accuracy and structure and performance. After analyzing and summarizing and combining with the actual situation, it was found that the combination of adaptive path spacing and composite filling path can better meet the requirements of production of arc additive manufacturing in real life. Finally, combined with the current research status, research difficulties and related national policies of arc additive manufacturing technology path planning, the future development trend of arc additive manufacturing technology is to realize the automation, intelligence and green manufacturing of complex components.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081202位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号