文章摘要
洪敏,王善林,陈宜,等.低压等离子喷涂技术及研究现状[J].精密成形工程,2020,12(3):146-153.
HONG Min,WANG Shan-lin,CHEN Yi,et al.Low-pressure Plasma Spraying Technology and Its Research Status[J].Journal of Netshape Forming Engineering,2020,12(3):146-153.
低压等离子喷涂技术及研究现状
Low-pressure Plasma Spraying Technology and Its Research Status
投稿时间:2020-04-10  修订日期:2020-05-10
DOI:10.3969/j.issn.1674-6457.2020.03.018
中文关键词: 低压等离子喷涂  热障涂层  燃料电池  太阳能  半导体
英文关键词: low-pressure plasma spraying  thermal barrier coating  fuel cell  solar energy  semiconductor
基金项目:国家自然科学基金(51965044);航空科学基金(20185456005);江西省重点研发计划(20192BBEL50002)
作者单位
洪敏 1. 江西省航空构件成形与连接重点实验室南昌 330063 
王善林 1. 江西省航空构件成形与连接重点实验室南昌 330063 
陈宜 1. 江西省航空构件成形与连接重点实验室南昌 330063 
邓颖 1. 江西省航空构件成形与连接重点实验室南昌 330063 
郭正华 1. 江西省航空构件成形与连接重点实验室南昌 330063 
陈卫民 2. 广州先艺电子科技有限公司广州 511400 
吴集思 1. 江西省航空构件成形与连接重点实验室南昌 330063 
黄永德 1. 江西省航空构件成形与连接重点实验室南昌 330063 
摘要点击次数: 2934
全文下载次数: 2374
中文摘要:
      低压等离子喷涂作为一种热喷涂技术,相比于传统的大气等离子喷涂技术以及气相物理沉积,可制备更加纯净、更为致密、结合强度更高的涂层。主要介绍了低压等离子喷涂的原理、分类及特征,回顾了低压等离子喷涂的产生及发展历程,并与等离子喷涂、超低压等离子喷涂和等离子喷射沉积相比较,分析了其在涂层制备上的独特优势。进一步叙述了低压等离子喷涂技术在制备热障涂层、燃料电池、太阳能、半导体等领域的国内外研究及应用情况,并对其发展进行了展望,指出低压等离子喷涂技术未来的重点发展方向在于对等离子喷涂焰流与材料基板作用机理进行深入研究,以及与其他前沿技术进行复合。
英文摘要:
      As a thermal spraying technology, low-pressure plasma spraying technology can produce a cleaner, denser, and higher bonding strength coating than traditional atmospheric plasma spraying technology and vapor-phase physical deposition. The principle, classification and characteristics of low-pressure plasma spraying were mainly introduced and the generation and development of low-pressure plasma spraying were reviewed. Compared with plasma spraying, ultra-low-pressure plasma spraying and plasma spray deposition, the low-pressure plasma spraying technology was analyzed for its unique advantages in preparing coating. The domestic and foreign research and application of low-pressure plasma spraying technology in the preparation of thermal barrier coatings, fuel cells, solar energy, semiconductors and other fields were further described and the development was prospected. It was also pointed out that the key development direction of low-pressure plasma spraying technology in the future was the in-depth study on the plasma spray flame and the mechanism of the material substrate, as well as the combination with other cutting-edge technologies.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12297874位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号