文章摘要
李海静,陈有芳,王丽荣,等.基于三维几何模型的船舶扶强材自动理想化系统开发研究[J].精密成形工程,2020,12(2):109-113.
LI Hai-jing,CHEN You-fang,WANG Li-rong,et al.Automatic Idealization System of Ship Stiffener Based on Three-dimensional Geometric Model[J].Journal of Netshape Forming Engineering,2020,12(2):109-113.
基于三维几何模型的船舶扶强材自动理想化系统开发研究
Automatic Idealization System of Ship Stiffener Based on Three-dimensional Geometric Model
投稿时间:2019-12-24  修订日期:2020-03-10
DOI:10.3969/j.issn.1674-6457.2020.02.018
中文关键词: 船舶  扶强材  规范计算  理想化系统  单元梁
英文关键词: ship  stiffener  calculation of structural rules  idealization system  unit beam
基金项目:国家自然科学基金(51609089)
作者单位
李海静 1. 华中科技大学 材料科学与工程学院武汉 430074 
陈有芳 2. 中国船级社技术研发中心北京 100007 
王丽荣 2. 中国船级社技术研发中心北京 100007 
唐宜健 2. 中国船级社技术研发中心北京 100007 
胡丰梁 2. 中国船级社技术研发中心北京 100007 
章志兵 1. 华中科技大学 材料科学与工程学院武汉 430074 
摘要点击次数: 2466
全文下载次数: 1736
中文摘要:
      目的 开发一套基于三维几何模型的船舶扶强材自动理想化系统。方法 针对船舶模型中扶强材截面形状、尺寸多变,分布密度大,进行结构规范计算时计算量大、计算条件复杂、人工计算难以涵盖全面的问题,考虑扶强材的截面变化、依附结构与相交关系,将船舶模型中的扶强材离散重组简化为单元梁,并以单元梁为基本单位进行船体梁结构相关强度校核参数的快速自动计算。结论 通过扶强材自动理想化系统,实现了对船舶扶强材间距等13项规范校核参数的快速自动计算,提高了船舶规范校核精度,缩短了船舶规范建模周期。
英文摘要:
      The paper aims to develop an automatic idealization system for ship stiffeners based on a three-dimensional geometric model. In view of the variable shape and size of the stiffeners in the ship model, and the large distribution density, the large calculation of structural rules, the complex calculation conditions, and the difficulties for manual calculations to cover comprehensive problems, considering the cross-section, the attachment structures and the intersection relationships, the stiffeners were reconstructed into unit beams to calculate relevant strength parameters of hull girder structures and hull stiffener plate structures with unit beam as the basic unit quickly and automatically. Through the automatic idealization system of stiffeners, fast and automatic calculation of 13 standard verification parameters such as the distance between stiffeners is realized, improving the accuracy of ship specification verification and shortening the cycle of ship specification design.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12075435位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号