文章摘要
王浩淼,史淑艳,付雪松,等.表面纳米化对高温Ti合金与TiAl合金的扩散连接工艺及力学性能影响[J].精密成形工程,2020,12(2):48-54.
WANG Hao-miao,SHI Shu-yan,FU Xue-song,et al.Effect of Surface Nanocrystallization on Diffusion Bonding Process and Mechanical Property of Titanium Alloy and Titanium Aluminium Alloy at High Temperature[J].Journal of Netshape Forming Engineering,2020,12(2):48-54.
表面纳米化对高温Ti合金与TiAl合金的扩散连接工艺及力学性能影响
Effect of Surface Nanocrystallization on Diffusion Bonding Process and Mechanical Property of Titanium Alloy and Titanium Aluminium Alloy at High Temperature
投稿时间:2020-01-22  修订日期:2020-03-10
DOI:10.3969/j.issn.1674-6457.2020.02.008
中文关键词: 表面纳米化  扩散连接  钛合金  钛铝合金
英文关键词: surface nanocrystallization  diffusion bonding  TC11 titanium alloy  titanium aluminum alloy
基金项目:国家自然科学基金(51975084a,51405059);航空科学基金(20185425009);中央高校基本科研业务费专项资金(DUT19LAB16);大学生创新创业项目
作者单位
王浩淼 1. 大连理工大学 材料科学与工程学院辽宁 大连 116085 
史淑艳 1. 大连理工大学 材料科学与工程学院辽宁 大连 116085 
付雪松 1. 大连理工大学 材料科学与工程学院辽宁 大连 116085 
王晓晨 1. 大连理工大学 材料科学与工程学院辽宁 大连 116085 
周文龙 1. 大连理工大学 材料科学与工程学院辽宁 大连 116085 
许慧元 2. 中国航空制造技术研究院北京 100024 
李志强 2. 中国航空制造技术研究院北京 100024 
摘要点击次数: 2522
全文下载次数: 1829
中文摘要:
      目的 研究表面纳米化Ti合金与TiAl合金异质扩散连接的界面反应、力学性能和工艺条件。方法 利用高能喷丸技术对钛合金的表面进行纳米化处理,然后在高温压力真空炉内进行扩散连接实验。结果 Ti合金/TiAl扩散连接的结合强度与中间层厚度密切相关,当中间层厚度为1.7~2.0 μm时,剪切强度最大。结论 表面纳米化可以促进原子扩散、增加接头厚度、缩短扩散连接所需的时间。对于扩散界面存在缝隙接头,在无压热处理条下表面纳米化样品可以快速提高焊合率,改善连接质量。
英文摘要:
      The work aims to study the interfacial reaction, mechanical properties and process conditions of diffusion bonding between surface nanocrystallized Ti alloy and TiAl alloy. The surface layer of titanium alloy was nanocrystallized by high energy shot peening technology, and then diffusion bonding experiments were carried out in high temperature pressure vacuum furnace. The strength of Ti alloy/TiAl diffusion bonding was closely related to the thickness of the intermediate layer. When the thickness of the intermediate layer was in the range of 1.7-2.0 μm, the shear strength was the largest. Surface nanocrystallization can promote atom diffusion, increase joint thickness and shorten diffusion bonding time. For joints with gap in diffusion interface, surface nano-sample under non-pressure heat treatment strip can rapidly improve bonding rate and bonding quality.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12247267位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号