梁永红,邵帅,张栩,等.钛合金搅拌摩擦焊焊具水冷系统设计与研究[J].精密成形工程,2019,11(5):123-126.
LIANG Yong-hong,SHAO Shuai,ZHANG Xu,et al.Design and Research of Water Cooling System for Friction Stir Welding in Titanium Alloy[J].Journal of Netshape Forming Engineering,2019,11(5):123-126. |
| 钛合金搅拌摩擦焊焊具水冷系统设计与研究 |
| Design and Research of Water Cooling System for Friction Stir Welding in Titanium Alloy |
| 投稿时间：2019-07-21 修订日期：2019-09-10 |
| DOI：10.3969/j.issn.1674-6457.2019.05.018 |
| 中文关键词: 钛合金 搅拌摩擦焊 水冷系统 焊具 |
| 英文关键词: titanium alloy friction stir welding water cooling system tools |
| 基金项目:江西省优势科技创新团队重点项目（20181BCB19002） |
|
| 摘要点击次数: 2792 |
| 全文下载次数: 1969 |
| 中文摘要: |
| 目的 针对钛合金搅拌摩擦焊过程中，搅拌头磨损严重的问题，研制一种搅拌头水冷系统。方法 该水冷系统主要由转轴、保护盖、冷却水循环装置、冷却水管、引流罩等5部分组成。该装置结构简单、操作方便、装夹可靠。结果 搅拌头磨损情况得到改善，在焊接0.5 m后，搅拌头几乎无磨损，实现了钛合金的良好连接，所得接头焊核区最高硬度达HV527，显著高于母材。结论 通过焊具水冷系统，可减少搅拌头的磨损，大大提高了接头质量和焊接效率。 |
| 英文摘要: |
| The paper aims to develop a water cooling system for the tools to solve the problem of severe wear of the tools during the friction stir welding of titanium alloy. The water cooling system mainly consists of five parts: a rotating shaft, a protective cover, a cooling water circulation device, a cooling water pipe, and a directional hood. The device has the advantages of simple structure, convenient operation and reliable clamping. After welding for 0.5 m, the tools was almost wear-free, the wear condition of the tools was improved. Good connection of the titanium alloy was achieved. The maximum hardness of the stir zone of joint reached HV527. With the water cooling system for the welding tools, the wear of the tools can be reduced, and the joint quality and welding efficiency can be greatly improved. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号