文章摘要
刘龙涛,陈超越,李霞,等.激光增材制造单晶高温合金研究进展[J].精密成形工程,2019,11(4):73-80.
LIU Long-tao,CHEN Chao-yue,LI Xia,et al.Research Progress in Laser Additive Manufacturing Technology of Single Crystal Superalloy[J].Journal of Netshape Forming Engineering,2019,11(4):73-80.
激光增材制造单晶高温合金研究进展
Research Progress in Laser Additive Manufacturing Technology of Single Crystal Superalloy
投稿时间:2019-06-26  修订日期:2019-07-10
DOI:10.3969/j.issn.1674-6457.2019.04.010
中文关键词: 激光增材制造  单晶高温合金  外延生长  CET转变
英文关键词: laser additive manufacturing  single crystal superalloys  epitaxial growth  CET transformation
基金项目:国家自然基金(51604171,51690162);上海市科委项目(17JC1400602);上海市扬帆计划(16YF1404300);国家两机重大专项(2017-Ⅶ-0008-0102)
作者单位
刘龙涛 上海大学 材料科学与工程学院 省部共建高品质特殊钢冶金与制备国家重点实验室上海 200444 
陈超越 上海大学 材料科学与工程学院 省部共建高品质特殊钢冶金与制备国家重点实验室上海 200444 
李霞 上海大学 材料科学与工程学院 省部共建高品质特殊钢冶金与制备国家重点实验室上海 200444 
王江 上海大学 材料科学与工程学院 省部共建高品质特殊钢冶金与制备国家重点实验室上海 200444 
任忠鸣 上海大学 材料科学与工程学院 省部共建高品质特殊钢冶金与制备国家重点实验室上海 200444 
摘要点击次数: 3141
全文下载次数: 2145
中文摘要:
      镍基单晶高温合金具有良好的高温强度、抗氧化和抗腐蚀性能、抗蠕变性能和组织稳定性,被广泛应用于制造航空发动机和燃气轮机叶片。由于其工作条件复杂恶劣,采用有效手段修复单晶叶片可以大大提高其使用寿命。综述了激光增材制造技术制备单晶高温合金的研究现状,介绍了激光增材制造技术制备单晶合金的理论基础,以及控制其单晶凝固组织的困难和不足,着重综述了激光增材制造技术控制单晶高温合金凝固制造的方法,主要包括通过激光参数调控温度梯度及凝固速率,以及通过基体晶体取向控制晶粒外延生长。最后,展望了该领域未来的主要研究方向和发展前景。
英文摘要:
      It is well-known that nickel-based single crystal superalloys have excellent properties, including high temperature strength, oxidation and corrosion resistance, creep resistance, and structural stability. Therefore, they are widely used in blades of aircraft engines and gas turbines. Due to complicated and harsh working conditions, the service life of single crystal blades can be prolonged by efficient repair technology. In this paper, the status of research on laser additive manufacturing technology for single crystal superalloys was reviewed. The theoretical basis of the additive manufacturing for single crystal superalloy and the difficulties and shortages of controlling single crystal solidification structures were introduced. The methods of controlling solidification and manufacturing of single crystal superalloys by laser additive manufacturing technology were reviewed, mainly including controlling temperature gradient and solidification rate by laser parameters and controlling epitaxial growth of crystal grains by controlling the crystal orientation of substrates. Finally, the main research directions and development prospect of this field were prospected.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12071060位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号