文章摘要
晏梦雪,田小永,李涤尘.高性能聚芳醚酮及其复合材料粉末床熔融成形的现状与挑战[J].精密成形工程,2019,11(4):64-72.
YAN Meng-xue,TIAN Xiao-yong,LI Di-chen.Powder Bed Fusion of the Polyaryletherketone and Composites with High Performance-Research Status and Challenge[J].Journal of Netshape Forming Engineering,2019,11(4):64-72.
高性能聚芳醚酮及其复合材料粉末床熔融成形的现状与挑战
Powder Bed Fusion of the Polyaryletherketone and Composites with High Performance-Research Status and Challenge
投稿时间:2019-06-29  修订日期:2019-07-10
DOI:10.3969/j.issn.1674-6457.2019.04.009
中文关键词: 增材制造  3D打印  粉末床熔融成形  聚芳醚酮  复合材料  聚醚酮  聚醚醚酮  聚醚酮酮
英文关键词: additive manufacturing  3D printing  powder bed fusion forming  PAEK  composites  PEK  PEEK  PEKK
基金项目:国家高技术研究发展计划(863)(2015AA042503)
作者单位
晏梦雪 西安交通大学 机械制造系统工程国家重点实验室西安 710049 
田小永 西安交通大学 机械制造系统工程国家重点实验室西安 710049 
李涤尘 西安交通大学 机械制造系统工程国家重点实验室西安 710049 
摘要点击次数: 3221
全文下载次数: 2202
中文摘要:
      粉末床熔融成形是增材制造技术中的一种,以聚合物及其复合粉末为原材料,可用于特种工程塑料聚芳醚酮及其复合材料的增材制造,无需任何工装和模具即可完成复杂结构制件的直接成形,为航空航天、汽车工业领域内对制件结构优化和快速开发提供了一种解决方案。介绍了粉末床熔融成形聚芳醚酮及其复合材料的国内外研究现状,从成形系统、原材料、成形工艺以及碳纤维增强聚芳醚酮复合材料增强机理与性能等几个方面展开了论述,并对粉末床熔融成形聚芳醚酮及其复合材料面临的挑战进行了分析。
英文摘要:
      Powder Bed Fusion, which is a kind of Additive Manufacturing processes, uses the polymer powder and its composite powder as raw material. It could directly fabricate the polyaryletherketone (PAEK) and its composites with high me-chanical performance. By this technology, the parts with complex geometries could be prepared without any tooling or molding process, which provides a solution for structure optimization design and rapid development for high performance composite parts in the aerospace and automobile industry. In this paper, research status of the powder bed fusion of polyaryletherketone and its composites at home and abroad were introduced. The powder bed fusion system for PAEK, raw materials, process parameters, the enhanced PAEK composites and mechanical performances were discussed. At last, the challenges about the application of this technology were analyzed.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12080677位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号