文章摘要
张安峰,张金智,张晓星,等.激光增材制造高性能钛合金的组织调控与各向异性研究进展[J].精密成形工程,2019,11(4):1-8.
ZHANG An-feng,ZHANG Jin-zhi,ZHANG Xiao-xing,et al.Research Progress in Tissue Regulation and Anisotropy of High-performance Titanium Alloy by Laser Additive Manufacturing[J].Journal of Netshape Forming Engineering,2019,11(4):1-8.
激光增材制造高性能钛合金的组织调控与各向异性研究进展
Research Progress in Tissue Regulation and Anisotropy of High-performance Titanium Alloy by Laser Additive Manufacturing
投稿时间:2019-05-25  修订日期:2019-07-10
DOI:10.3969/j.issn.1674-6457.2019.04.001
中文关键词: 高性能  激光增材制造  研究进展  各向异性
英文关键词: high performance  laser additive manufacturing  research progress  anisotropy
基金项目:国家重点研发计划(2016YFB1100102);国家自然科学基金(51775417)
作者单位
张安峰 西安交通大学 a. 机械制造系统工程国家重点实验室西安 710049 
张金智 西安交通大学 a. 机械制造系统工程国家重点实验室西安 710049 
张晓星 西安交通大学 b. 金属材料强度国家重点实验室西安 710049 
王宏 西安交通大学 a. 机械制造系统工程国家重点实验室西安 710049 
霍浩 西安交通大学 a. 机械制造系统工程国家重点实验室西安 710049 
齐振佳 西安交通大学 b. 金属材料强度国家重点实验室西安 710049 
王豫跃 西安交通大学 b. 金属材料强度国家重点实验室西安 710049 
摘要点击次数: 3832
全文下载次数: 2992
中文摘要:
      激光增材制造技术(Laser Additive Manufacturing, LAM)是一种实现零件精确成形和高性能成性一体化制造的先进技术。首先介绍了两种典型激光增材制造技术的成形原理及其特点;然后重点介绍了西安交通大学在高性能钛合金激光增材制造组织调控和各向异性方面的研究进展:① 硼变质对激光增材制造TC4零件的组织调控和各向异性的影响;② 硅变质对感应加热辅助激光增材制造TC4微观组织的影响;③ 超声冲锻对激光增材制造TC4零件的组织调控和各向异性的影响。最后阐述了激光增材制造技术所面临的挑战与任务。
英文摘要:
      Laser Additive Manufacturing (LAM) is actually an advanced manufacturing technology that combines precision shaping with high-performance. Firstly, the forming principles and characteristics of two typical LAM technologies were intro-duced. Then the research progress in tissue regulation and anisotropy of high performance titanium alloy by LAM in Xi'an Jiaotong University was introduced emphatically: ① The influences of boron metamorphism on tissue regulation and anisotropy of LAM TC4 parts; ② The influences of silicon modification on TC4 microstructure of inductively heated assisted LAM; ③ The effects of ultrasonic impact forging on tissue regulation and anisotropy of LAM TC4 parts. Ultimately, the challenges and tasks that LAM technology may confront with were explained.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第13213106位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号