文章摘要
何鑫,李晓宸.模具水路水密性检测装置开发[J].精密成形工程,2019,11(2):67-70.
HE Xin,LI Xiao-chen.Development of Water Tightness Testing Device for Mold and Waterway[J].Journal of Netshape Forming Engineering,2019,11(2):67-70.
模具水路水密性检测装置开发
Development of Water Tightness Testing Device for Mold and Waterway
投稿时间:2018-11-08  修订日期:2019-03-10
DOI:10.3969/j.issn.1674-6457.2019.02.012
中文关键词: 热成形  模具水路  水路密封性
英文关键词: hot forming  mold waterway  waterway tightness
基金项目:
作者单位
何鑫 上海赛科利汽车模具技术应用有限公司上海汽车车身先进制造工程技术研究中心上海 201209 
李晓宸 上海赛科利汽车模具技术应用有限公司上海汽车车身先进制造工程技术研究中心上海 201209 
摘要点击次数: 3413
全文下载次数: 2595
中文摘要:
      目的 简化热成形模具水路密封性的检测方法,减少人力、设备、时间成本。方法 开发制造一种模具水路密封性检测装置,模拟生产设备冷却系统环境,检测热成形模具水路的水密性以及对模具水路中的杂质进行清洗。结果 检测装置可以对模具水路循环系统的流速和流量进行监控,对模具水路密封性进行检测,缩短模具制造周期,提高制造成本。结论 装置实现了前期对模具水路密封性检测的需求,简化了模具水路密封性检测的过程,释放了原有设备产能,减少了人力、设备、时间成本,达到了装置开发的目的。
英文摘要:
      The paper aims to simplify the testing method of waterway tightness of thermoforming die, reduce the cost of manpower, equipment and time. Mold and waterway tightness detection device was developed and manufactured to simulate the cooling system environment of production equipment, test the water tightness of hot forming mold waterway and clear the impurities in the mold waterway. The detection device could monitor the flow rate of the water circulation system of the die, inspect the tightness of the water circulation system of the die, shorten the manufacturing cycle of mold and increase the manufacturing cost. The device realizes the requirement of waterway tightness test of mold in the early stage, simplifies the process of waterway tightness test of mold, releases the capacity of original equipment, reduces the cost of manpower, equipment and time, and achieves the purpose of device development.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12076217位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号