文章摘要
周晓远,陈文琳,徐晨,等.实心边框铝型材挤压数值模拟与模具结构优化[J].精密成形工程,2019,11(2):35-40.
ZHOU Xiao-yuan,CHEN Wen-lin,XU Chen,et al.Numerical Simulation of Solid Aluminum Profile Extrusion and Optimization of Die Structure[J].Journal of Netshape Forming Engineering,2019,11(2):35-40.
实心边框铝型材挤压数值模拟与模具结构优化
Numerical Simulation of Solid Aluminum Profile Extrusion and Optimization of Die Structure
投稿时间:2019-02-14  修订日期:2019-03-10
DOI:10.3969/j.issn.1674-6457.2019.02.006
中文关键词: 实心铝型材挤压  速度相对差  模具结构优化
英文关键词: solid aluminum extrusion  SDV  mold structure optimization
基金项目:安徽省2018重点研究与开发计划项目(1804a09020073)
作者单位
周晓远 1. 合肥工业大学 材料科学与工程学院合肥 230009 
陈文琳 1. 合肥工业大学 材料科学与工程学院合肥 230009 
徐晨 1. 合肥工业大学 材料科学与工程学院合肥 230009 
阮祥明 2. 安徽生信铝业股份有限公司安徽 宣城 242000 
吉宏选 2. 安徽生信铝业股份有限公司安徽 宣城 242000 
摘要点击次数: 3377
全文下载次数: 2768
中文摘要:
      目的 针对汽车用某实心边框铝型材出口流速不均匀的现象,改进模具的工作带、阻流块和促流角结构。方法 运用专业铝型材挤压成形有限元软件系统,对型材的挤压过程进行分析,模拟稳态挤压成形过程,以速度相对差作为衡量速度均匀程度的指标。结果 初始模具结构挤出的型材流速不均匀。通过改变工作带长度、增设阻流块以及增加促流角的方法,使得模具出口处的金属流速变得均匀。结论 改进后模具所受的压力更小,可以减小模具的磨损,增加模具寿命,模拟结果与实验吻合。
英文摘要:
      The paper aims to improve the working belt, flow block and flow angle of mold to solve the uneven flow at the exit of a certain solid aluminum for vehicle. This paper used the professional aluminum profile extrusion forming finite element software system to analyze the extrusion process of the profile and simulate the steady extrusion process. The relative speed dif-ference was used as an index to measure the speed uniformity. The profile flow rate extruded by the initial mold structure was not uniform. The metal flow rate at the exit of the mold was made uniform by changing the length of the working belt, adding a chock block, and increasing the flow angle. The improved mold is subjected to less pressure, which can reduce the wear of the mold and increase the life of the mold. The simulation results are in agreement with the experiment.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12069929位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号