李迪凡,刘俊,王长朋,等.QT700-2球墨铸铁发动机曲轴失效分析[J].精密成形工程,2019,11(1):108-113.
LI Di-fan,LIU Jun,WANG Chang-peng,et al.Failure Analysis of QT700-2 Ductile Iron Engine Crankshaft[J].Journal of Netshape Forming Engineering,2019,11(1):108-113. |
| QT700-2球墨铸铁发动机曲轴失效分析 |
| Failure Analysis of QT700-2 Ductile Iron Engine Crankshaft |
| 投稿时间：2018-12-18 修订日期：2019-01-10 |
| DOI：10.3969/j.issn.1674-6457.2019.01.018 |
| 中文关键词: QT700-2球墨铸铁 曲轴 疲劳断裂 失效分析 |
| 英文关键词: QT700-2 ductile iron crankshaft fatigue fracture failure analysis |
| 基金项目: |
|
| 摘要点击次数: 4102 |
| 全文下载次数: 2853 |
| 中文摘要: |
| 目的 某厂生产的QT700-2球墨铸铁曲轴在路试过程中出现断裂，需寻找失效原因并提出解决措施。方法 通过应用金相组织分析、化学成分分析、表面残余应力测试和力学性能测试等方法，对该曲轴的失效原因进行了分析。结果 测试后分析结果表明，曲轴是在较大扭转循环载荷下，在第四连杆颈滚压圆角边缘多点萌生裂纹而导致疲劳断裂是其失效的主要原因。结论 建议改进热处理工艺，保证组织的均匀性；改进加工工艺，减少应力集中；并强化表面残余应力以提高曲轴的疲劳寿命。 |
| 英文摘要: |
| The work aims to find out the failure analysis and propose the solution for fracture of QT700-2 ductile iron crankshaft produced by a factory during the road test. The failure analysis for crankshaft was carried out by the examination of metallographic microstructure, chemical composition analysis, surface residual stress test and mechanical property test. The test results showed that the fatigue fracture was the main cause of crankshaft failure due to multi-point initiation of cracks at the corner edge of the fourth connecting rod neck during rolling under large torsional cyclic load. It is suggested to improve the heat-treating process to ensure the uniformity of microstructure and improve machining process to reduce stress concentration and then enhance the surface residual stress to improve the fatigue life of crankshaft. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号