文章摘要
李春洋,刘华,刘光辉,等.制动系统不锈钢管端部精密成形工艺研究[J].精密成形工程,2019,11(1):36-40.
LI Chun-yang,LIU Hua,LIU Guang-hui,et al.Precision Forming Process of Stainless Steel Tube Ends in Braking System[J].Journal of Netshape Forming Engineering,2019,11(1):36-40.
制动系统不锈钢管端部精密成形工艺研究
Precision Forming Process of Stainless Steel Tube Ends in Braking System
投稿时间:2018-12-03  修订日期:2019-01-10
DOI:10.3969/j.issn.1674-6457.2019.01.006
中文关键词: 不锈钢管  精密成形  多工步镦挤  数值模拟
英文关键词: stainless steel tube  precision forming  multi-step extrusion  numerical simulation
基金项目:
作者单位
李春洋 郑州机械研究所郑州 450001 
刘华 郑州机械研究所郑州 450001 
刘光辉 郑州机械研究所郑州 450001 
汪金保 郑州机械研究所郑州 450001 
王涛 郑州机械研究所郑州 450001 
曹民业 郑州机械研究所郑州 450001 
摘要点击次数: 3887
全文下载次数: 2857
中文摘要:
      目的 改善铁路货车制动系统管系现有的连接方式,对不锈钢管端部进行精密成形,以得到力学性能较好的锻造接头。方法 根据原有管系的连接方式及钢管塑性成形特点,提出对不锈钢管端部进行多工步镦挤的工艺方法。采用Deform-3D三维有限元模拟软件对工艺过程进行数值模拟,分析成形过程中锻件成形情况,以及锻件和模具的受力、温度、金属流动情况等。结果 在高温条件下采用的多工步镦挤工艺可以使钢管端部达到成形要求。结论 提出的钢管端部塑性成形工艺是可行的,对铁路货车制动系统管系连接方式的改善有重要的参考意义。
英文摘要:
      The paper aims to improve the existing pipe connection mode of the railway truck brake system, and forge the stainless steel pipe end to obtain forged joint with good mechanical properties. According to the connection mode of the original pipe system and the plastic forming characteristics of the steel pipe, a multi-step extrusion process was proposed for the stainless steel pipe end. The process-3D finite element simulation software was used to simulate the process, and the forging condition of the forming process, as well as the force, temperature and metal flow of the forging and die were analyzed. The multi-step extrusion process used under high temperature and high speed conditions could make the end of the steel pipe end meet the forming requirements. The plastic forming process proposed for steel pipe end is feasible. It has important reference significance for the improvement of the connection mode of the railway truck brake system.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12073192位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号