赖小明,王国峰,张玉良,等.基于5A90板材的电致裂纹修复模拟研究[J].精密成形工程,2018,10(6):107-111.
LAI Xiao-ming,WANG Guo-feng,ZHANG Yu-liang,et al.Simulation Study on the Repair of Cracks in 5A90 Sheet by Current Treatment[J].Journal of Netshape Forming Engineering,2018,10(6):107-111. |
| 基于5A90板材的电致裂纹修复模拟研究 |
| Simulation Study on the Repair of Cracks in 5A90 Sheet by Current Treatment |
| 投稿时间：2018-06-16 修订日期：2018-11-10 |
| DOI：10.3969/j.issn.1674-6457.2018.06.018 |
| 中文关键词: 5A90板材 电流 裂纹 修复 模拟 |
| 英文关键词: 5A90 sheet current crack repairing simulation |
| 基金项目: |
|
| 摘要点击次数: 3671 |
| 全文下载次数: 2645 |
| 中文摘要: |
| 目的 探索进一步提升5A90板材塑性成形能力的有效途径。方法 从板材内部裂纹修复的角度出发，针对脉冲电流处理技术在5A90板材上的应用进行研究。采用数值模拟的方法对脉冲电流在板材裂纹处的作用进行分析，通过计算带裂纹板材通电后其内部电流场、温度场、应力场与位移场来模拟脉冲电流对材料内部裂纹的修复机制，并采用试验件对温度场的计算结果进行初步验证。结果 脉冲电流处理对板材内部裂纹具有一定程度的修复作用，并且可以阻碍裂纹的进一步扩展。结论 脉冲电流处理可以有效减少5A90板材的内部缺陷，并提高其塑性成形能力。 |
| 英文摘要: |
| The paper aims to explore an effective way to improve the plastic forming ability of 5A90 plates. The application of pulse current processing technology on 5A90 sheets was studied from the perspective of internal cracks repairing in this paper. The effect of the pulse current on the plate crack was analyzed by numerical simulation. The internal current field, temperature field, stress field and displacement field of the cracked plate were calculated to simulate the repairing effect of pulse current on the internal cracks. The pieces were used to verify the calculation of the temperature field. The results show that the pulse current treatment had a certain degree of repairing effect of internal cracks, and it could prevent further propagation of the cracks. Therefore, pulse current treatment can effectively reduce the internal defects of 5A90 sheet metal and improve its plastic forming ability. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号