文章摘要
陶杰,熊昊,万柏方,等.三维自由弯曲成形装备及其关键技术[J].精密成形工程,2018,10(4):1-13.
TAO Jie,XIONG Hao,WAN Bo-fang,et al.3D Free-bending Forming Equipment and Key Technology[J].Journal of Netshape Forming Engineering,2018,10(4):1-13.
三维自由弯曲成形装备及其关键技术
3D Free-bending Forming Equipment and Key Technology
投稿时间:2018-06-10  修订日期:2018-07-10
DOI:10.3969/j.issn.1674-6457.2018.04.001
中文关键词: 自由弯曲  装备  典型构型  关键技术  工程应用
英文关键词: free-bending  equipment  typical configuration  key technology  engineering application
基金项目:国家自然科学基金委员会国际(地区)合作与交流项目(51711540301)
作者单位
陶杰 1. 南京航空航天大学 材料科学与技术学院南京 2100162. 江苏省核能装备材料工程实验室南京 210016 
熊昊 1. 南京航空航天大学 材料科学与技术学院南京 2100162. 江苏省核能装备材料工程实验室南京 210016 
万柏方 江苏图南合金股份有限公司江苏 丹阳 212352 
魏文斌 1. 南京航空航天大学 材料科学与技术学院南京 2100162. 江苏省核能装备材料工程实验室南京 210016 
程旋 1. 南京航空航天大学 材料科学与技术学院南京 2100162. 江苏省核能装备材料工程实验室南京 210016 
王林涛 江苏图南合金股份有限公司江苏 丹阳 212352 
余耀晖 1. 南京航空航天大学 材料科学与技术学院南京 2100162. 江苏省核能装备材料工程实验室南京 210016 
王成 1. 南京航空航天大学 材料科学与技术学院南京 2100162. 江苏省核能装备材料工程实验室南京 210016 
郭训忠 1. 南京航空航天大学 材料科学与技术学院南京 2100162. 江苏省核能装备材料工程实验室南京 210016 
摘要点击次数: 4045
全文下载次数: 3716
中文摘要:
      作为一种新型柔性成形技术,三维自由弯曲技术特别适用于具有复杂空间轴线、异形截面的空心构件。主要综述了三维自由弯曲成形技术的发展历程、成形装备的发展过程以及国内外的研究现状。在此基础上,重点分析了三维自由弯曲成形装备的5种典型构型及其机构运动原理,介绍了5种构型的各自特点及工程应用,并对自由弯曲成形装备的关键技术如过渡段处理技术、有限元数值模拟技术、难变形材料自由弯曲热成形技术等方面进行综述,并结合笔者的研究经历对管材自由弯曲成形研究中存在的问题进行了简要分析。最后,对管材三维自由弯曲成形技术及装备在航空航天、核电、汽车、医疗等领域的应用前景进行了分析和展望。
英文摘要:
      As a new flexible forming technology, three-dimensional free-bending technology is very suitable to be used for hollow component of complex space axis and deformed section. In this paper, development process of free-bending forming technology and forming equipment as well as current research status at home and abroad were introduced in details. Characteristics, working principles and engineering application of five typical configurations were analyzed selectively on this basis. Afterwards, key technologies of the free-bending system such as the transition section processing technology, FE simulation technology and hot bending technology were systematically explained and problems in free-bending forming of pipes were analyzed in combination with experience of the author. In the end, the engineering application and the potential application prospect of the system were analyzed and prospected.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12069319位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号