文章摘要
刘伟东.铝合金车轮机加立车压爪紧固螺栓断裂问题的分析及优化[J].精密成形工程,2018,10(1):181-185.
LIU Wei-dong.Analysis and Optimization of Jaw Bolt Breakage in Aluminum Alloy Wheel Machining Process[J].Journal of Netshape Forming Engineering,2018,10(1):181-185.
铝合金车轮机加立车压爪紧固螺栓断裂问题的分析及优化
Analysis and Optimization of Jaw Bolt Breakage in Aluminum Alloy Wheel Machining Process
投稿时间:2017-11-08  修订日期:2018-01-10
DOI:10.3969/j.issn.1674-6457.2018.01.025
中文关键词: 压力传感器  力学模型  疲劳损伤
英文关键词: pressure sensor  mechanical model  fatigue failure
基金项目:
作者单位
刘伟东 中信戴卡股份有限公司 工程技术研究院河北 秦皇岛 066011 
摘要点击次数: 3780
全文下载次数: 3343
中文摘要:
      目的 研究分析立车压爪螺栓工作过程中的受力情况,寻求螺栓断裂的原因,并通过优化改进夹具结构,实现提高螺栓使用寿命的目的。方法 采用压力传感器系统,实测压爪压力,并建立力学模型,结合螺栓的力学性能参数,推断螺栓断裂的原因。结果 通过优化改进夹具结构,将螺栓承受的部分弯矩转移到压爪和压爪轴上,能够延长螺栓的使用寿命。结论 螺栓断裂主要是由于螺栓反复加载过程中出现了疲劳损伤,导致螺栓断裂。
英文摘要:
      The paper aims to find the cause of the bolt breakage by studying the force condition of the jaw bolt in the vertical lathe to improve the lifetime of the jaw bolt by optimizing the fixture structure. The pressure of the jaw was tested with a pressure sensor system. A mechanical model was built to deduce the cause of the bolt breakage in combination with mechanical property parameters of the jaw bolt. The optimized fixture structure can extend the bolt lifetime by transferring the bending moment beared by the bolt to the jaw and jaw axle. Fatigue failure which is produced in loading and unloading repeatedly leads to bolt breakage.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12070149位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号