文章摘要
王泽宇,霸金,马蔷,等.纳米材料增强复合钎料的研究进展[J].精密成形工程,2018,10(1):82-90.
WANG Ze-yu,BA Jin,MA Qiang,et al.Research Progress on Nanomaterial Reinforced Composite Brazing Filler[J].Journal of Netshape Forming Engineering,2018,10(1):82-90.
纳米材料增强复合钎料的研究进展
Research Progress on Nanomaterial Reinforced Composite Brazing Filler
投稿时间:2017-11-16  修订日期:2018-01-10
DOI:10.3969/j.issn.1674-6457.2018.01.010
中文关键词: 纳米材料  复合钎料  性能  碳纳米管  石墨烯
英文关键词: nanomaterials  composite brazing filler  properties  carbon nanotubes  graphene
基金项目:国家自然科学基金(U1537206, 51575135, 51622503)
作者单位
王泽宇 哈尔滨工业大学 先进焊接与连接国家重点实验室哈尔滨150001 
霸金 哈尔滨工业大学 先进焊接与连接国家重点实验室哈尔滨150001 
马蔷 哈尔滨工业大学 先进焊接与连接国家重点实验室哈尔滨150001 
亓钧雷 哈尔滨工业大学 先进焊接与连接国家重点实验室哈尔滨150001 
曹健 哈尔滨工业大学 先进焊接与连接国家重点实验室哈尔滨150001 
冯吉才 哈尔滨工业大学 先进焊接与连接国家重点实验室哈尔滨150001 
摘要点击次数: 4384
全文下载次数: 4820
中文摘要:
      综合评述了纳米材料增强复合钎料的研究与应用现状。首先介绍了纳米材料增强复合钎料的制备方法,讨论了机械混合法与原位合成法的工艺及特点,然后分别从金属颗粒、氧化物或其他化合物及碳纳米材料3个方面来介绍纳米材料对复合钎料微观组织及性能的影响。重点指出了具有优异性能的碳纳米管与石墨烯材料增强复合钎料的研究进展,并对其发展趋势进行分析和展望。
英文摘要:
      Investigation and application of nanomaterial reinforced composite brazing filler were synthetically reviewed. Firstly, preparation of nanomaterial reinforced composite brazing filler was introduced, including the process and characteristics of the mechanical mixing method and the in-situ synthesis method. Then, effects of nanomaterial on microstructure and properties of composite brazing filler metal were discussed from three aspects: metal particles, oxides or compounds and carbon nanomaterials. In addition, the research progress of carbon nanotubes and graphene materials with excellent properties in the composite brazing filler metal were pointed out. Furthermore, the development trend of nanomaterial reinforced composite brazing filler was analyzed and forecasted.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12075838位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号