文章摘要
张大伟.复杂构件锻造预成形坯料设计综述[J].精密成形工程,2017,9(6):143-156.
ZHANG Da-wei.Review on Preform Design of Complex Component in Forging Process[J].Journal of Netshape Forming Engineering,2017,9(6):143-156.
复杂构件锻造预成形坯料设计综述
Review on Preform Design of Complex Component in Forging Process
投稿时间:2017-10-03  修订日期:2017-11-10
DOI:10.3969/j.issn.1674-6457.2017.06.026
中文关键词: 复杂构件  大型筋板类构件  预成形  锻造  反向模拟  正向模拟  优化设计
英文关键词: complex component  large-scale rib-web component  preform  forging  backward simulation  forward simulation  optimal design
基金项目:
作者单位
张大伟 西安交通大学 机械工程学院西安 710049 
摘要点击次数: 3431
全文下载次数: 3105
中文摘要:
      锻件预成形坯料设计是保证成形工艺顺利进行、获得无缺陷锻件、降低锻造载荷的关键环节。对于大型复杂构件,其预成形坯料形状影响到制坯工艺的周期、成本、预成形组织性能。分别从基于反向模拟技术的预成形坯料设计、基于优化设计方法的预成形坯料设计、基于正向过程分析的预成形坯料设计等方面,评述了复杂构件锻造预成形坯料设计的国内外研究现状,指出了大型筋板类构件的预成形坯料形状要求以及设计方法。
英文摘要:
      Preform design of forging is the key link to ensure smooth forging running, obtain forging without defects, and reduce forging loading. The shape of preform for large-scale complex component influences time, cost, microstructure and property in preforming process. In this paper, the research status at home and abroad on preform design was summarized from the aspects such as preform design based on backward simulation technique, preform design based on optimized design method, and preform design based forward analysis of forming process. Then, the suitable shape of preform for large-scale rib-web component and the corresponding designed method were presented in detail.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12073854位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号