文章摘要
曾向东.铬青铜厚板零件的旋压加工[J].精密成形工程,2017,9(5):230-234.
ZENG Xiang-dong.Spinning Process of Chromium Bronze Heavy Plate Parts[J].Journal of Netshape Forming Engineering,2017,9(5):230-234.
铬青铜厚板零件的旋压加工
Spinning Process of Chromium Bronze Heavy Plate Parts
投稿时间:2017-07-08  修订日期:2017-09-10
DOI:10.3969/j.issn.1674-6457.2017.05.037
中文关键词: 铬青铜  厚板旋压  强旋成形  普旋成形  贴模
英文关键词: chromium bronze  thick plate spinning  high spin forming  universal spin forming  punch
基金项目:
作者单位
曾向东 西安航天发动机厂西安 710100 
摘要点击次数: 3307
全文下载次数: 2989
中文摘要:
      利用加工实例论证了旋压加工空心厚壁回转体铬青铜零件的加工方案。结果表明,采用“普旋与强旋相结合辅以热旋”的复合方案旋压成形零件,可以避免零件内外表面出现疲劳裂纹,提高贴膜精度,缩短了生产周期,更为科学、快速有效。“普旋与强旋相结合辅以热旋”的复合方案旋压加工空心回转体厚板铬青铜零件的经验,可以推广到类似产品的旋压加工中去,具有一定的实用性。
英文摘要:
      The paper aims to discuss the scheme for processing heavy hollow plate parts made of chromium bronze by spinning rotation. The composite scheme which combines universal and high spinning with hot spinning used for forming parts by spinning could avoid fatigue crack on inner and outer surfaces, improve the punching precision and shorten the production cycle. It is more scientific, fast and effective. The experience of spinning hollow parts made of Chromium Bronze by compound scheme can be extended to the spinning process of similar products, and has certain practicability.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081397位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号