文章摘要
符韵,张霞,林军,等.轻质高强镁合金机匣可分凹模模锻工艺[J].精密成形工程,2017,9(5):166-170.
FU Yun,ZHANG Xia,LIN Jun,et al.Die Forging Process of Lightweight and High Strength Magnesium Alloy Casing with Separable Female Die[J].Journal of Netshape Forming Engineering,2017,9(5):166-170.
轻质高强镁合金机匣可分凹模模锻工艺
Die Forging Process of Lightweight and High Strength Magnesium Alloy Casing with Separable Female Die
投稿时间:2017-07-11  修订日期:2017-09-10
DOI:10.3969/j.issn.1674-6457.2017.05.025
中文关键词: Mg-5Gd-4Y-0.3Zr合金  热模拟  有限元模拟  可分凹模
英文关键词: Mg-5Gd-4Y-0.3Zr alloy  thermal simulation  finite element simulation  separable female die
基金项目:
作者单位
符韵 西南技术工程研究所重庆 400039 
张霞 西南技术工程研究所重庆 400039 
林军 西南技术工程研究所重庆 400039 
夏祥生 西南技术工程研究所重庆 400039 
宁海青 西南技术工程研究所重庆 400039 
摘要点击次数: 3740
全文下载次数: 3185
中文摘要:
      目的 通过对新型镁合金材料Mg-5Gd-4Y-0.3Zr进行力学性能实验和成形工艺数值模拟分析,对镁合金机匣成形工艺进行设计优化和开发参考。方法 采用Gleeble-3500热模拟试验机,得到该镁合金材料在不同温度、不同应变速率下对应的真应力数据,并建立材料模型,应用在有限元模拟分析中。结果 经优化后的工艺方案能得到充型饱满、无质量缺陷的镁合金机匣锻件,并通过工艺实验,验证了该设计方案的可行性。结论 采用可分凹模模锻成形,能够锻造出外形美观、强度达标的轻质镁合金机匣。
英文摘要:
      This work aims to optimize design and process reference by mechanical experiment and finite element simulation of Mg-5Gd-4Y-0.3Zr magnesium alloy forming process. Gleeble-3500 thermal simulation instrument was used to obtain the true stress data at different temperature and strain rate of magnesium alloy. A material model was built to be used in finite element simulation. The process program after optimization could obtain magnesium alloy casing of full shape and good quality. Process experiments proved that the design was feasible. Lightweight magnesium alloy casing of intact shape and high strength can be formed with separable female die.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12079516位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号