文章摘要
张邦冉,马霞,刘桂亮,等.Al-B-N中间合金对1070铝合金力学性能及导电性的影响[J].精密成形工程,2017,9(5):44-49.
ZHANG Bang-ran,MA Xia,LIU Gui-liang,et al.Influences of Al-B-N Master Alloy on Mechanical Properties and Conductivity of 1070 Alloy[J].Journal of Netshape Forming Engineering,2017,9(5):44-49.
Al-B-N中间合金对1070铝合金力学性能及导电性的影响
Influences of Al-B-N Master Alloy on Mechanical Properties and Conductivity of 1070 Alloy
投稿时间:2017-08-14  修订日期:2017-09-10
DOI:10.3969/j.issn.1674-6457.2017.05.006
中文关键词: Al-B-N中间合金  工业纯铝  AlN  力学性能  导电率
英文关键词: Al-B-N master alloy  1070 commercial purity aluminum  AlN  mechanical properties  conductivity
基金项目:国家自然科学基金(51071097)
作者单位
张邦冉 山东大学 材料液固结构演变与加工教育部重点实验室济南 250061 
马霞 山东大学 材料液固结构演变与加工教育部重点实验室济南 250061 
刘桂亮 山东吕美熔体技术有限公司济南 250061 
刘相法 山东大学 材料液固结构演变与加工教育部重点实验室济南 250061 
摘要点击次数: 4076
全文下载次数: 3845
中文摘要:
      目的 研究Al-B-N中间合金对1070铝合金力学性能和导电性的影响。方法 向1070铝合金熔体中添加适量Al-B-N中间合金,借助其中的纳米AlN颗粒(AlNP)强化铝基体,同时以AlB2相去除铝中降低导电率的过渡族金属元素(如Zr, Cr, V等)。结果 添加质量分数为2%的Al-B-N中间合金,1070铝合金强度由66 MPa提高至85 MPa,导电率由60.14%IACS提升至62.12%IACS,较未添加之前分别提高了28.8%和3.2%,此时合金伸长率为35.8%。结论 适量Al-B-N中间合金可以同时提高1070铝合金抗拉强度与导电率,实现协同强化。
英文摘要:
      The paper aims to study influences of Al-B-N master alloy on mechanical properties and conductivity of 1070 alloy. An appropriate amount of Al-B-N master alloy was added to the 1070 aluminum alloy melt to strengthen the aluminum matrix by feat of nano AlN particles (AlNP), and remove transition metals (such as Zr, Cr, V, etc.) that affect conductivity in aluminum with the help of A1B2 phase. When 2wt.% of Al-B-N master alloy was added, the strength of 1070 aluminum alloy increased from 66 MPa to 85 MPa and its conductivity increased from 60.14% IACS to 62.12% IAC, which were increased by 28.8% and 3.2% respectively. And then, the elongation of the alloy was 35.8%. Both tensile strength and conductivity of 1070 aluminum alloy can be strengthened to achieve cooperative reinforcement with an appropriate amount of Al-B-N master alloy.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12279771位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号